1st Gen Neon 1995 through 1999 Neons

Neon Sensor and Part Locations

Old Sep 7, 2006 | 01:43 PM
  #1  
das2123's Avatar
das2123
Thread Starter
|
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Old Oct 9, 2008 | 12:30 AM
  #2  
ajpranger's Avatar
ajpranger
Professional
Joined: Sep 2008
Posts: 155
Likes: 0
Question Burnt Hose?

sorry
 
Reply
Old Apr 15, 2009 | 07:32 PM
  #3  
rvrfsh's Avatar
rvrfsh
Registered User
Joined: Apr 2009
Posts: 16
Likes: 0
Default location not accurate for crank sensor

I have a 2005 neon and tryed to follow directions from my chiltons repair manual and from directions given in this forum but my crank sensor was not behind the drive axle on passenger side but on the radiator side of block rite below the starter. I hope this helps because it took awhile for me to find.
 
Reply
Old Jun 1, 2009 | 10:41 PM
  #4  
9R/T.4door8's Avatar
9R/T.4door8
Registered User
Joined: Apr 2009
Posts: 40
Likes: 0
From: Greenwood, Indiana
Default oil pressure sensor? 98 dohc

2 part ? 1) where is it, and 2) how wud i hook up an autometer oil pressure gauge?
 
Reply
Old Aug 17, 2009 | 12:10 PM
  #5  
mancinibig's Avatar
mancinibig
Registered User
Joined: Aug 2009
Posts: 9
Likes: 0
Default 2005 Dodge neon sxt will not start.

2005 Dodge neon sxt will not start. Lights and everything work good, but when the key is turned the engine will not turn over. There is no click or any noise from the engine compartment ......please help
 
Reply
Old Aug 18, 2009 | 08:00 AM
  #6  
rvrfsh's Avatar
rvrfsh
Registered User
Joined: Apr 2009
Posts: 16
Likes: 0
Question any codes??

are you getting any codes and what are they??
 
Reply
Old Jan 10, 2010 | 10:17 PM
  #7  
myneonbeater's Avatar
myneonbeater
Registered User
Joined: Jan 2010
Posts: 3
Likes: 0
Default

95 neon highline, speedometer dances sometimes stops completely, going to zero, the rev meter doesnt work either when this happens . i also need a diagrahm of hoe to fix the airbag spring, it has caused the airbag light to come on and the horn to stop working
 
Reply
Old Aug 15, 2010 | 01:17 PM
  #8  
DOUG'SREDNEON's Avatar
DOUG'SREDNEON
Registered User
Joined: Aug 2010
Posts: 2
Likes: 0
From: NAMPA ,IDAHO
Exclamation I'm sure this has come up before,

error code p0172? BANK 1 RICH.
Any one have a common idea or know of a common failing in neon's that brings this error code and makes the car run super rough? any help would be apreciated.
 
Reply
Old Aug 15, 2010 | 01:22 PM
  #9  
DOUG'SREDNEON's Avatar
DOUG'SREDNEON
Registered User
Joined: Aug 2010
Posts: 2
Likes: 0
From: NAMPA ,IDAHO
Default

the circuit boards were soldered poorly. you need to remove and take apart the spedo housing. re-solder the biggest solder points on the circuit board on the back of the spedo.
 
Reply
Old Dec 15, 2010 | 11:13 PM
  #10  
Big Lars's Avatar
Big Lars
Registered User
Joined: Dec 2010
Posts: 7
Likes: 0
Default New To Site

No spark, 97 Neon. No voltage at coilpack orange wire with key on, what is next?
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:55 AM.