When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
tell me more about this intake. Use neon throttle body, and its a caravan intake manifold? I dont get it. Ive got a short ram I built for this car already
If you have an MTX, a cheap upgrade is the ATX TB. The ATX TB is 52 mm as opposed to the 49mm MTX TB. It allows you to rev a little quicker. The 3.0L intake tube from a mid-90s Chrysler V6 engine looks like the pic below.
Oh just the tube, I see. Well Ive already got a TB to filter pipe, mandrel bend too so I dont have to worry about those ribs. But thats cool how it hooks right up
Oh just the tube, I see. Well Ive already got a TB to filter pipe, mandrel bend too so I dont have to worry about those ribs. But thats cool how it hooks right up
Fits right over the TB and then you cut the tube put some exhaust pipe in between and point it down in front of the tranny.
THats pretty cool, much easier to fabricate than my honda was thats fore sure. But this intake is off my old 04 sunfire gt. Modified it to fit on my other 2 hondas, and now for my neon. Sounds pretty nice
it isnt hard to make an intake and you can pretty much put the filter where ever you want
i think mine woulda worked real good now that its getting colder outside