Turbo Package 4 Sale
#1
Turbo Package 4 Sale
I have decided to give dodge forum members first dibs on this setup.....will be taking best offer.
Parts List:
This here is a Custom Designed Turbo Exhaust Manifold, Made to fit a SOHC Mopar 2.0L 4cyl engine and a Freshly Rebuilt & Balanced, .42/.48 A/R, Water and Oil cooled with NEW Brass Bushing, Seals, Bolts, etc, etc,.. Garrett T3 Turbo.
- 3 Guages w all accesories (boost, oil pressure and air/fuel) - Glowshift Guages Tinted Series
- Fuel pressure regulator w/hoses and adaptors
- Misc Hoses..
- 3/4" heater x 6'
- 1/2" heater x 8'
- 5/8" heater x 4.5'
- 5/16" fuel line x 4'3"
- used oil return line 5/8" hose 2.5'
- steel braided oil pressure line 31"
- brass elbows 5/8" x 3
- brass adapters 5/8" to 1/2"
- Intercooler - 20"x6"x2.5" radiator surface - 28" from inlet to outlet
- 2.5" intercooler tubing
- 2x 18" straight
- various other sections have all been trimmed (see picture)
- OBX Reinforced 90 Degree Silicone Elbow 2.00" - 2.25"
- 2x 90 silicone elbows (not shown)
- various straight silicone couplers plus sections of silicone hose (pictured)
- Oil filter samdwich plate (oil pressure sender attached)
- Oil catch can (not shown)
- AOBE map clamp
- Tonnes of various hose clamps
- New unused T3 gasket set
**All not shown items will be up soon, my car is in getting fixed(bad computer!!!) and those parts will be pulled when i get it back**
Parts List:
This here is a Custom Designed Turbo Exhaust Manifold, Made to fit a SOHC Mopar 2.0L 4cyl engine and a Freshly Rebuilt & Balanced, .42/.48 A/R, Water and Oil cooled with NEW Brass Bushing, Seals, Bolts, etc, etc,.. Garrett T3 Turbo.
- 3 Guages w all accesories (boost, oil pressure and air/fuel) - Glowshift Guages Tinted Series
- Fuel pressure regulator w/hoses and adaptors
- Misc Hoses..
- 3/4" heater x 6'
- 1/2" heater x 8'
- 5/8" heater x 4.5'
- 5/16" fuel line x 4'3"
- used oil return line 5/8" hose 2.5'
- steel braided oil pressure line 31"
- brass elbows 5/8" x 3
- brass adapters 5/8" to 1/2"
- Intercooler - 20"x6"x2.5" radiator surface - 28" from inlet to outlet
- 2.5" intercooler tubing
- 2x 18" straight
- various other sections have all been trimmed (see picture)
- OBX Reinforced 90 Degree Silicone Elbow 2.00" - 2.25"
- 2x 90 silicone elbows (not shown)
- various straight silicone couplers plus sections of silicone hose (pictured)
- Oil filter samdwich plate (oil pressure sender attached)
- Oil catch can (not shown)
- AOBE map clamp
- Tonnes of various hose clamps
- New unused T3 gasket set
**All not shown items will be up soon, my car is in getting fixed(bad computer!!!) and those parts will be pulled when i get it back**
#7