1st Gen Neon 1995 through 1999 Neons

good and bad news

Thread Tools
 
Search this Thread
 
Old Dec 5, 2006 | 01:09 AM
  #11  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default RE: good and bad news

ORIGINAL: 95neonriceeater
i remember seeing the clamp part broken on the sensor closest to you...
i think we might have broken it when we took it all apart
That would be it.

ORIGINAL: 95neonriceeater
if i just used electric tape and taped it down would that work?
Might....might not!
 
Reply
Old Dec 5, 2006 | 01:11 AM
  #12  
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default RE: good and bad news

only one way to find out
 
Reply
Old Dec 5, 2006 | 01:11 AM
  #13  
95neonriceeater's Avatar
95neonriceeater
Thread Starter
|
Record Breaker
Joined: Aug 2006
Posts: 1,424
Likes: 0
From:
Default RE: good and bad news

alright

well i could push it all the way down but it would come up about a milimeter because there was no clamp to keep it down
i just called my dad and he said it might be it
but the way the car was acting
(he said it was misfiring a little)
was because of the vacuum
and MAYBE the EGR

i really really hope it isn't the EGR
that's going to be a beezy to change...
 
Reply
Old Dec 5, 2006 | 01:13 AM
  #14  
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default RE: good and bad news

EGR isnt that hard to change....
 
Reply
Old Dec 5, 2006 | 01:14 AM
  #15  
95neonriceeater's Avatar
95neonriceeater
Thread Starter
|
Record Breaker
Joined: Aug 2006
Posts: 1,424
Likes: 0
From:
Default RE: good and bad news

don't you have to take off a bunch of stuff?

wait nevermind...hahaha

it's right near the stock intake...
i just don't want to wait even longer for a stupid EGR though...
 
Reply
Old Dec 5, 2006 | 01:25 AM
  #16  
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default RE: good and bad news

if you have cruise controll then just unbolt the deal that behind the PDC and you can get to the EGR easily with a ratchet with an extension
 
Reply
Old Dec 5, 2006 | 01:31 AM
  #17  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default RE: good and bad news

Even with cruise I still got to mine just fine. Takes some manuveuring, but it can be done.
 
Reply
Old Dec 5, 2006 | 01:33 AM
  #18  
95neonriceeater's Avatar
95neonriceeater
Thread Starter
|
Record Breaker
Joined: Aug 2006
Posts: 1,424
Likes: 0
From:
Default RE: good and bad news

yea my dad bought a tool just so we can get to the EGR bolts

i don't have cruse control
so it'll just be easier
 
Reply
Old Dec 5, 2006 | 02:11 AM
  #19  
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default RE: good and bad news

but for those who have cruise, it just makes it easier to remove the cruise thing
 
Reply




All times are GMT -4. The time now is 12:42 PM.