DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   1st Gen Neon (https://dodgeforum.com/forum/1st-gen-neon-77/)
-   -   1st Gen FAQ's and How-To's (https://dodgeforum.com/forum/1st-gen-neon/91957-1st-gen-faqs-and-how-tos.html)

das2123 Feb 2, 2007 02:33 PM

1st Gen FAQ's and How-To's
 
General
The TAO of the Neon
Where are you from?

Engine Swap & Performance
Sport Compact Car - Project Dodge Neon
Rebuilding Chrysler's 2.0L Engine
Information for a 2.0 engine swap - SOHC to DOHC
1st gen SRT swap how to; using ngc and the nv-t350
Can I put the SRT-4 turbo on my first gen and what all do I need?
2.4 Swap How-To
What do I need to do to put a DOHC head on my SOHC block?
How do I make my 1st Gen Neon Faster?
How-to: 3.0L intake (CAI)

How-to's & Maintenance
My Speedometer and/or gauges aren't working properly, what do I do?
Oil Change
Push Button Starter How-To
Timing Belt How-To
Headgasket How-To
Battery Relocation How-To
Rear Disc Swap How-To
How to replace alternator belt and P.S. & A/C belt
2.4 Swap How-To
ATX to MTX Swap *courtesy of w103rtm

Parts
List of sites that carry aftermarket parts for neon

Logan338 Sep 12, 2011 07:16 PM

I've ask all over, dealer, parts store, not one good answer. On the air inlet duct, where does the tube leading out of the bottom connect to. Any help given would be great! Thanks.

scottunangst Sep 30, 2011 08:30 AM

alternater ajusting bolt
 
this post was help for me adjusting my neons loose alternater belt. i have a cold air intake so the stock air box has been removed. from the drivers side the 13mm adjusting bolt is easy to get to. the air box removal is less work than moving the coolant and power steering tanks, also gives you more room. hpoe this helps, thanks, scott.

boowayne Jun 21, 2012 05:55 PM

95 neon
 
what would cause my neon to bog after installing a M2performance header it doesn't bog bad but when i hammer the throttle down it will increase speed but with a slight bog

scottunangst Jun 22, 2012 06:44 AM


Originally Posted by boowayne (Post 2810173)
what would cause my neon to bog after installing a M2performance header it doesn't bog bad but when i hammer the throttle down it will increase speed but with a slight bog

your engine is not getting enough fuel now that it is breathing better with the header. upgrading your computer(ecu) will get you more fuel and advance your timing a little.

cskaj88 Sep 11, 2012 05:34 PM

I have an ATX 1998 Dodge Neon with the 2.0 SOHC. Looking to just make it run like new or slightly better it's my to work an home car. The engine I have in it as of right now has 114k Miles. Any advice?

96dohcsportcoupe Sep 24, 2012 01:28 PM

how does it run?


Posted from Dodgeforum.com App for Android

Kyle Richard Feb 26, 2013 01:56 AM

stock flywheel weight
 
What is the weight of the stock flywheel in a 99 neon sport?


All times are GMT -4. The time now is 10:29 PM.


© 2026 MH Sub I, LLC dba Internet Brands