Is there a trick to the oil pressure sensor wiring
#1
02-24-2007 | 09:21 PM
Thread Starter
Joined: Feb 2007
Posts: 22
Likes: 0
Is there a trick to the oil pressure sensor wiring
Hello all, I'm new and if you want to know more about me I posted in the new members area. This promises to be the first of many posts. I tried searching on this but,I didn't find anything. I'm working on a '97 Neon w/ 138K. The oil pressure sensor is spewing oil everywhere. I have the new sensor and I found the sensor on the car but, I can't for the life of me get the wire off. At this point I've broken off the clip that holds it on but, it won't budge. I really can't reach it topull hardeither from the top or from the bottom. I've tried pryingwith a screwdriver. Is there some trick to this???
#2
02-24-2007 | 11:51 PM
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
RE: Is there a trick to the oil pressure sensor wiring
the wireplugs on these cars have a little red sliding piece that move from side to side and works as a stopper so that the plug wont just fall off the sensor.....you have to move the little slider and then push down on the clip to release the plug....
it is easily accessable from underneath the car
it is easily accessable from underneath the car
#3
02-24-2007 | 11:59 PM
Rookie
Joined: Jan 2007
Posts: 73
Likes: 0
From:
RE: Is there a trick to the oil pressure sensor wiring
ORIGINAL: BarnOwl
Hello all, I'm new and if you want to know more about me I posted in the new members area. This promises to be the first of many posts. I tried searching on this but,I didn't find anything. I'm working on a '97 Neon w/ 138K. The oil pressure sensor is spewing oil everywhere. I have the new sensor and I found the sensor on the car but, I can't for the life of me get the wire off. At this point I've broken off the clip that holds it on but, it won't budge. I really can't reach it topull hardeither from the top or from the bottom. I've tried pryingwith a screwdriver. Is there some trick to this???
Hello all, I'm new and if you want to know more about me I posted in the new members area. This promises to be the first of many posts. I tried searching on this but,I didn't find anything. I'm working on a '97 Neon w/ 138K. The oil pressure sensor is spewing oil everywhere. I have the new sensor and I found the sensor on the car but, I can't for the life of me get the wire off. At this point I've broken off the clip that holds it on but, it won't budge. I really can't reach it topull hardeither from the top or from the bottom. I've tried pryingwith a screwdriver. Is there some trick to this???
#4
02-25-2007 | 12:05 AM
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
#5
02-25-2007 | 11:04 AM
Thread Starter
Joined: Feb 2007
Posts: 22
Likes: 0
RE: Is there a trick to the oil pressure sensor wiring
ORIGINAL: art02gtHow much did you pay for the sensor? Mine is leaking oil too.
#6
02-26-2007 | 08:31 AM
Thread Starter
Joined: Feb 2007
Posts: 22
Likes: 0
RE: Is there a trick to the oil pressure sensor wiring
I thought I'd post back and let everyone know I got it. The light of day helped. What I didn't see before was that this sensor has two set of clips holding the wire on. I'd broken off one of them but not the other. I was able to get a small pair of pliers in there to release the clip and get the harness off. The new sensor is on and I believe the leak is stopped. Thanks to all that replied.
Next week timing chain.
Next week timing chain.