Well my radio has been out for a month and i still can't find out how to hook it up. And i am not paying someone on the hour to do it. My truck is a 1992 d150 with a durabrand CD palyer slash radio from WAL-MART usually around 40 bucks. Now i didn't install it so i have no prior experience with them. When the guy tried to steal it he yanked it and pulled all the wires from each other. I have the plug in the back of the radio and some wires coming from the dash. The connector i can buy to connect it has two plugs and some open wires. I guess you connect one plug to factory one to radio and other to the power. But the wires i ahve coming from radio and dash aren't the same colors. I have a red and black which is power and ground. But the others are for speakers but i don't know which ones go where. Does anyone knowwhat color speaker wires they used on the each door side. Right and left. I know on the radio what colors are what but the dash wires ihave no clue about.Could someone tell me which ones are what or send me somewhere i can get the info from?

 

A 9 volt battery can be used to determine which wires are for which speakers.

 

or a screwdriver can be used to pull out the speaker and see what color the wires are.

 

See tried to pull off the door panels and the armrest is holding me up. I took the screw out of it and it still won't come off. I believe you have to take it offto remove thedoor puller, because the bolt holding it in has to be taken out from the top, and i don't think you can get a wrench in there.Plus there is a screw near the bottom where that plasticgrillestarts but i can't find the head to unscrewit. Do i just hook the two speaker wires to the positive and negative on the 9V and listen for which one is buzzing? I like to find out becaus I am spending all day working on this, thanks for your help.

 

yes.just long enough to identify it and match up the wires.