1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Need a little pep.

Thread Tools
 
Search this Thread
 
Old Apr 24, 2009 | 02:00 PM
  #1  
travixhouser's Avatar
travixhouser
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 16
Likes: 1
From: Doyle
Question Need a little pep.

I got a 73 dodge d100 with a 360 two barrel. auto. how can i increase throttle response. its really sluggish. also sometimes when i push the gas too hard too fast it'll backfire through the carb. can i retard the timing at all. im not looking at buying anything. and i don't want more power. i just wanna push the gas n go. tips please
 

Last edited by travixhouser; Apr 24, 2009 at 03:24 PM.
Reply
Old Apr 25, 2009 | 08:25 AM
  #2  
SEAL's Avatar
SEAL
Champion
Joined: Mar 2009
Posts: 2,639
Likes: 4
From: Bent Mountain Va
Default

A back fire through the carb always sends me to the timing first.
 
Reply
Old Apr 25, 2009 | 12:20 PM
  #3  
travixhouser's Avatar
travixhouser
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 16
Likes: 1
From: Doyle
Default

What would you suggest to cure this problem.
 
Reply
Old Apr 25, 2009 | 03:20 PM
  #4  
SEAL's Avatar
SEAL
Champion
Joined: Mar 2009
Posts: 2,639
Likes: 4
From: Bent Mountain Va
Default

Do a tune up.
 
Reply
Old Apr 25, 2009 | 11:03 PM
  #5  
lugnuts's Avatar
lugnuts
All Star
Joined: Feb 2008
Posts: 941
Likes: 0
From: Odessa Tx.
Default

Check the vacuum advance and make sure the diaphram's not busted, and hook the advance to a ported vacuum source. [Only has vac. when you open the throttle,passage is above the the throttle blades] See if the mechanical advance inside the dist. is stuck. If it is tear the dist apart and clean it up, lube the advance assm.
 
Reply




All times are GMT -4. The time now is 03:55 PM.