1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

door adjustment 92 d350

Thread Tools
 
Search this Thread
 
Old May 4, 2009 | 12:17 AM
  #1  
ccchristensen50's Avatar
ccchristensen50
Thread Starter
|
Registered User
Joined: May 2009
Posts: 1
Likes: 0
Default door adjustment 92 d350

left door is hitting striker how is the easyest wat to lift door up?
 
Reply
Old May 4, 2009 | 08:44 AM
  #2  
SEAL's Avatar
SEAL
Champion
Joined: Mar 2009
Posts: 2,639
Likes: 4
From: Bent Mountain Va
Default

Hinge to door bolts give lateral adjustment only. Hinge to body bolts give lateral and vertical adjustment. The lock striker plate can also be adjusted. Which one to use depends on how the door sits in the opening.
 
Reply
Old May 4, 2009 | 01:34 PM
  #3  
nemesis_SS's Avatar
nemesis_SS
All Star
Joined: Jan 2008
Posts: 861
Likes: 1
From:
Default

i hate adjusting doors, hoods or any other moving body part. usually get stuck doing it alone and it takes many hands and time.
 
Reply
Old May 8, 2009 | 10:09 PM
  #4  
dodgeme99's Avatar
dodgeme99
Registered User
Joined: May 2009
Posts: 6
Likes: 0
From: nc
Default

i had this same problem. i had to install new door hinge bushings. the door was a little sloppy. its faily simple useing a cherry picker or even a tree limb. just need something to hold the door up removing the top hinge bolts on the door side. if you can move the door by picking up on it at the rear you need bushings.
 
Reply




All times are GMT -4. The time now is 02:08 AM.