1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

looking to buy...help me out!

Thread Tools
 
Search this Thread
 
  #1  
Old 12-18-2009 | 11:39 PM
thabble's Avatar
thabble
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 2
Likes: 0
Thumbs down looking to buy...help me out!

i'm possibly looking at an 87 Dodge ram with a slant 6...it is leaking a little fluid, but has a good interior and body...i've never really liked dodge till here recently and have really been getting into these 1st gen rams for some reason...what are the things i should check and look for...you know the normal things that usually need fixing? thanks for any help you can provide!
 
  #2  
Old 12-19-2009 | 07:18 AM
rwb's Avatar
rwb
Rookie
Joined: Aug 2009
Posts: 54
Likes: 0
From: Kansas
Default

The slant 6 is pretty much an indestructable engine. Just make sure that you check the compression on the engine and that you check the tranny. Don't expect the ac to work and be prepared to change the carb. I had to do all of that on my old 82 d150 I bought in 92. I kept it until 02 and its still running today.
 
  #3  
Old 12-19-2009 | 01:52 PM
tooltime's Avatar
tooltime
Veteran
Joined: Mar 2009
Posts: 426
Likes: 0
From: Mt Airy NC
Default

Rust problems is above the rear wheel wells especially if have molding and the cab corners. Check out the frame. Most of the trucks are missing jacks,manuals and sometimes the spare tires. If you can pull up the carpet/mat and check the floor. Check the fluids. Check out a place called cliffards 6=8 they are for slant 6 with v-8 power place. Also make sure the climate control works(mine the connector had rotted off) and the wipers. If get it may want to take off the cowl and loosen the bottom if front fenders to clean out any dirt,leaves etc.Good luck
 
  #4  
Old 12-21-2009 | 02:31 PM
RamKing's Avatar
RamKing
Professional
Joined: Mar 2009
Posts: 121
Likes: 0
From: ontario,canada
Default

i have a slant six great truck leaks abit but its a good truck
 
  #5  
Old 01-03-2010 | 05:35 AM
79powerwagonneb's Avatar
79powerwagonneb
Registered User
Joined: Jan 2010
Posts: 4
Likes: 0
Default

If your looking for parts for a 70's dodge....i have almost anything you would need! I started a project with a 79 powerwagon and i relocating to houston. With that being said i have no room for the powerwagon. Extra parts include long bed( ready sand blasted and primered)..cab..(painted sublime green)...doors, fenders, inner fender wells, radiator support( sandblasted and primered)..2wd rolling frame with 8 3/4 rearend...new headman headers...so much stuff i cant even list! Plus...i have a complete powerwagon ready to drive....with 318..727..i pretty great shape...interior looks almost new...just needs new carpet...and has a lil tear in the seat...it is a complete powerwagon!!! so if anyone is intrested...contact me! thanx!
 




All times are GMT -4. The time now is 10:10 PM.