1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

P.o.s

Thread Tools
 
Search this Thread
 
  #1  
Old 02-28-2010, 09:03 PM
audioman10's Avatar
audioman10
audioman10 is offline
Rookie
Thread Starter
Join Date: Feb 2010
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default P.o.s

okay does a 92 le ram 150 have a possie....
 
  #2  
Old 03-01-2010, 12:17 AM
crazzywolfie's Avatar
crazzywolfie
crazzywolfie is offline
Legend
Join Date: Jun 2009
Location: orangeville ontario
Posts: 8,024
Received 71 Likes on 67 Posts
Default

the best way to find out is take your vin # to the dealership and you them to print you out a build sheet.
 
  #3  
Old 03-01-2010, 05:33 AM
SEAL's Avatar
SEAL
SEAL is offline
Champion
Join Date: Mar 2009
Location: Bent Mountain Va
Posts: 2,639
Likes: 0
Received 3 Likes on 2 Posts
Default

Jack both wheels off the ground. Turn 1 wheel by hand and note which way the other wheel turns. If they are both turning in the same direction you have possie, if they turn in opposite directions no possie.
 
  #4  
Old 03-01-2010, 08:49 AM
aaron7's Avatar
aaron7
aaron7 is offline
Veteran
Join Date: Oct 2005
Location: MA
Posts: 364
Received 1 Like on 1 Post
Default

Yah, just go to any Chrysler dealer with your VIN. They'll tell you all the original specs.
 
  #5  
Old 03-01-2010, 12:37 PM
SEAL's Avatar
SEAL
SEAL is offline
Champion
Join Date: Mar 2009
Location: Bent Mountain Va
Posts: 2,639
Likes: 0
Received 3 Likes on 2 Posts
Default

There is one flaw with judging anything on the vehicle, especially possie via what is on the build sheet. Unless you are the original owner you can't be sure the differential is original equipment. In this case if it had been changed to possie and you put in the wrong fluid you would destroy the differential. We must remember that we are dealing with old vehicles that a lot of people like to modify. This is why the build sheet is a good starting point but you must verify the information unless you are sure that the part is original to that vehicle.
 



Quick Reply: P.o.s



All times are GMT -4. The time now is 11:02 AM.