Will 8 lug wheels off a 3/4ton chevy fit my '75 W200 8 lug? Thanks.

 

They will but you will likely need a spacer to clear the tire rod/draglink depending on the chev wheels you have. If your wheels are newer they will be setup for 9/16 lugs but your truck only has 1/2" so take your time installing so you get them on right

 

The wheels I'm looking for are just the old steel ones that came on older work trucks/vans. I know anything off an older Ford will work, but the only ones I can find are on Chevys.

 

About the only problem you may have then is the rubbing. A 1/8" spacer is usually all you need and can likely find them at a junk yard. Alternately you can buy 1,1.5 or 2" spacers for a more agressive look

 

Turns out the rear hubs are about 1/4" too big for the wheels. No biggy though, after a few minutes with an angle grinder I was good to go. Thanks for the replies.