Looking for a cam for my 92 w-250 360
Thread Starter
|
Amateur
Joined: Dec 2010
Posts: 25
Likes: 0
Looking for a cam for my 92 w-250 360
Hi guys,
I have a 92 w250 with a 360 that just seems to be anemic. I was pulling a car trailer with ramps up up a hill at highway speed (55-60) and had to floor it to maintain any speed at all (forget accelerate). Id like to swap a cam into it to get more torque and power, but still get decent gas mileage (and a nice lope wouldnt hurt). I cant seem to find any that will work on my truck when searching for them. Ive found plenty of flat tappet cams, but no roller cams. Its tbi, so I would like to not have to put a new computer in if possible. Ive heard good things about rv cams, but cant find one that will work on my truck, so if you could post a link that would be much appreciated!
Thanks,
Brian
I have a 92 w250 with a 360 that just seems to be anemic. I was pulling a car trailer with ramps up up a hill at highway speed (55-60) and had to floor it to maintain any speed at all (forget accelerate). Id like to swap a cam into it to get more torque and power, but still get decent gas mileage (and a nice lope wouldnt hurt). I cant seem to find any that will work on my truck when searching for them. Ive found plenty of flat tappet cams, but no roller cams. Its tbi, so I would like to not have to put a new computer in if possible. Ive heard good things about rv cams, but cant find one that will work on my truck, so if you could post a link that would be much appreciated!
Thanks,
Brian
Legend
Joined: Jun 2009
Posts: 8,025
Likes: 72
From: orangeville ontario
i don't think you can change the cam on a 88-95 unless you switch to a carbed or upgrade your truck to be obd2 compatible. 88-95 you can't do nothing because you can't do anything to the computer.