1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Driver Door Needed - what years fit?

Thread Tools
 
Search this Thread
 
Old Jul 22, 2011 | 05:01 AM
  #1  
Kdcarter's Avatar
Kdcarter
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 4
Likes: 0
Default Driver Door Needed - what years fit?

Novice help, please. My son needs a driver's door for his 1984 Ram 150. It has 1 inch wide chrome molding, only. What years of trucks will match his door? Thanks!
 
Reply
Old Jul 22, 2011 | 09:46 PM
  #2  
tooltime's Avatar
tooltime
Veteran
Joined: Mar 2009
Posts: 426
Likes: 0
From: Mt Airy NC
Default

Finding a door with the molding maybe hard. If not mistaken 1981-1993 will fit. I have a 86 and replaced with a 84 i think. When you put them on make sure you have time bc you will have to adjust them and have some help. Good luck
 
Reply
Old Jul 23, 2011 | 04:52 AM
  #3  
Kdcarter's Avatar
Kdcarter
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 4
Likes: 0
Default

Thanks for the help! Even if you are out a bit on the upper end (I have no clue), that large of a range should be helpful.
 
Reply
Old Jul 24, 2011 | 04:14 PM
  #4  
RamKing's Avatar
RamKing
Professional
Joined: Mar 2009
Posts: 121
Likes: 0
From: ontario,canada
Default

the pins on eariler models are bigger then later ones, i think 85 and older are bigger and 86 and later are smaller, my 87 has doors off of a 85 and had to repalce the pins so they would close
 
Reply




All times are GMT -4. The time now is 12:40 AM.