1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

How to remove AC from 89 Dodge W 150 318 motor

Thread Tools
 
Search this Thread
 
Old Nov 7, 2012 | 10:55 AM
  #1  
nmscuba's Avatar
nmscuba
Thread Starter
|
Registered User
Joined: Nov 2011
Posts: 17
Likes: 0
Default How to remove AC from 89 Dodge W 150 318 motor

I have a question I hope someone can help me with. I have a 1989 Dodge W150 with a 318 engine and AC.

My AC unit is bad so I need to remove it. However the drive belts for the Alternator run off the AC down to the crank.

Is there a replacement idler pully available to take the place of the AC unit? I have not been able to find one after market or though the dealer

Also what did Dodge use for the same vehicle with NO AC??

Doe anyone have any pictures of their 89 dodge with a 318 and No AC? so I can see how its running the 2 belts?

I appreciate any help you can give me

Thank you
 
Reply
Old Nov 9, 2012 | 10:42 PM
  #2  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

https://dodgeforum.com/forum/dodge-r...s-section.html
 
Reply
Old Nov 9, 2012 | 11:07 PM
  #3  
sls001's Avatar
sls001
Captain
Joined: Mar 2006
Posts: 546
Likes: 0
Default

If you check out your local pick-a-parts you might be able to find the idler that fits where the AC compress goes. It bolts to the same brackets and in the same location as the compressor.

Check dodge trucks, ramchargers, and vans 1988-91
 
Reply
Old Nov 10, 2012 | 06:58 AM
  #4  
nmscuba's Avatar
nmscuba
Thread Starter
|
Registered User
Joined: Nov 2011
Posts: 17
Likes: 0
Default

Originally Posted by sls001
If you check out your local pick-a-parts you might be able to find the idler that fits where the AC compress goes. It bolts to the same brackets and in the same location as the compressor.

Check dodge trucks, ramchargers, and vans 1988-91
I did check and found it :-) Got everything installed. Thank you for the help
 
Reply
Old Jan 6, 2020 | 09:12 PM
  #5  
mark38090's Avatar
mark38090
Professional
Joined: Dec 2009
Posts: 104
Likes: 1
Default

Went to upullit today and not a single vehicle that wasn't serpentine belt setup.
 
Reply




All times are GMT -4. The time now is 02:54 AM.