1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1st Gen buzzer problem

Thread Tools
 
Search this Thread
 
  #1  
Old 09-28-2018, 01:40 PM
JustACummins's Avatar
JustACummins
JustACummins is offline
Registered User
Thread Starter
Join Date: Sep 2018
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default 1st Gen buzzer problem

Hello I need help figuring out the buzzer problem I am having..so my truck got stolen last year and they broke my ignition so i got a new one and installed it but now even when my door is closed the buzzer is still buzzing and if I put the key in a certain position it will stop.

And also If I jump the truck it will start but as soon as I turn it off it won't start again later on ..my alternator is fairly new..could it be the buzzer draining the battery?
 
  #2  
Old 09-28-2018, 09:35 PM
crazzywolfie's Avatar
crazzywolfie
crazzywolfie is offline
Legend
Join Date: Jun 2009
Location: orangeville ontario
Posts: 8,024
Received 71 Likes on 67 Posts
Default

there is 2 connectors on the ignition switch. unplug the one with less wires. should solve the buzzer issue.

disconnect the ground wire and stick a test light between the ground wire and the negative terminal. then start pulling fuses till light goes out.
 



Quick Reply: 1st Gen buzzer problem



All times are GMT -4. The time now is 07:48 PM.