1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

'87 Ram 50 Pickup...Plugs are White, Wont Smog, Ideas?

Old Sep 13, 2006 | 11:05 PM
  #1  
dubbington's Avatar
dubbington
Thread Starter
Joined: Sep 2006
Posts: 2
Likes: 0
Default '87 Ram 50 Pickup...Plugs are White, Wont Smog, Ideas?

My '87 Ram 50 4cyl pickup wont pass smog for the 2nd in 4 years. Shop says the catyltic converter is bad so Ill be replacing that tomorrow and they said the carb needs to be tuned.

I pulled the plugs and all of them are white. I replaced them, the rotor and cap, ran a can of SeaFoam down the carb and a little in the oil.

How do I lean out this carb? Where are the mixture screws? I cant find any info on this thing.

Thanks
Rc
 
Reply
Old Sep 14, 2006 | 03:36 AM
  #2  
bigfoot2184's Avatar
bigfoot2184
Joined: May 2006
Posts: 23
Likes: 0
From:
Default RE: '87 Ram 50 Pickup...Plugs are White, Wont Smog, Ideas?

Try looking up info for a Mitsubishi Mighty Max pickup, as they are the same thing. I had an 89 Dodge D-50 and i found this out quick... I have a book laying around somewhere... now i have somehting to do.... I'll look it up. What size motor do you have? I think there is two different 4 bangers....
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:16 PM.