Im getting to be Mr. Question around here..lol

Anybody know what the stock Rocker lift for 360 5.9L? (im pretty sure it is 1.5) I am going to replace my valve seals so i figured while im in there i better throw some roller rockers in there to.

I have a aftermarket Cam but im not sure what Lift they are (im calling the previous owner tomarrow) but it has been running on stock rockers for over a year now. so im assuming it is stock (kinda doubtful thoe). Would i be able to get away with 1.6 if they are stock?

Any Good brand i should look into as far as Rockers?

Any good brand i should look into as far as Valve Seals?

and also where would a good place to get these?

its hard to find anybody local that deals with dodge. they all seem to deal with Pontiac and Ford.

 

The stock lift is 1.6. If your cam isn't that big you can get 1.7's. I have the crane roller rockers & Viton valve seals. But if you're rich you can buy the crower ones. I imagine you can get both at www.summitracing.com or check out places like:
http://www.socaldakota.com/performan...lve_train.html

http://www.krcperformance.com/krc/

http://www.hughesengines.com/

 

1.7 seems to be the preffered size to move to with stock cams.