Stock v8 Throttle Body for sell
Thread Starter
|
Champion
Joined: Aug 2006
Posts: 3,051
Likes: 6
From: Roanoke, Texas
Stock v8 Throttle Body for sell
Came off my 00' RT Dak.
50mm TB (actually comes out to 48mm)
I took of the bracket that the stock airhat uses, since i was using a AEM intake. The bung in the middle of the TB is kinda smoothed.. due to the last owners stupid ***. Can be re threaded, but should work with long screws. not short ones.
and one of the linkage bracket screws broke off due to over torque. Im going to try to twist it out, but the bracket uses 3 holes total, 2 holds it in fine.. worked for me lol..but ya if you want pics let me know.. Ill try to take them tomorrow. But it has been cleaned very good.
The TB comes with the following items
4x Screws that hold the tb to the intake manifold
1x Linkage mount
1x AEM Thorttle body spacer (i dont want it)
The TB Does NOT come with the following...
Sensors
Gaskets
Looking to get 60$ Shipped, OBO
I accept Paypal +3.5% Fee, an Money Orders
Thanks,
Chris
50mm TB (actually comes out to 48mm)
I took of the bracket that the stock airhat uses, since i was using a AEM intake. The bung in the middle of the TB is kinda smoothed.. due to the last owners stupid ***. Can be re threaded, but should work with long screws. not short ones.
and one of the linkage bracket screws broke off due to over torque. Im going to try to twist it out, but the bracket uses 3 holes total, 2 holds it in fine.. worked for me lol..but ya if you want pics let me know.. Ill try to take them tomorrow. But it has been cleaned very good.
The TB comes with the following items
4x Screws that hold the tb to the intake manifold
1x Linkage mount
1x AEM Thorttle body spacer (i dont want it)
The TB Does NOT come with the following...
Sensors
Gaskets
Looking to get 60$ Shipped, OBO
I accept Paypal +3.5% Fee, an Money Orders
Thanks,
Chris
