Noobie...
Champion
Joined: Aug 2006
Posts: 3,051
Likes: 6
From: Roanoke, Texas
RE: Noobie...
ORIGINAL: 00DakR/T
Thanks for the welcome.
As for the truck, the way I got it is one of those stories. Haha
Like I said, I work at a local dealership as a technician. When I started, our diesel/trans tech had the R/T that I have now. And to make a long boring story short, he got another job and left. However, before he did, his wife bought him a 06 Daytona Charger provided that he trade this truck in. So, for $4000 I got a 00 R/T with 72k with the M1 intake, Holley 52mm TB, 24 lb injectors, MOPAR headers, MSD 6BTMbox with MSD coil and MOPAR wires, full 3" single exhaust w/Dynomax and turndown, and of course, the Powerdyne S/C at 6lbs.
As far as my mods, I want to get about a .512 cam from KRC, MOPAR valve springs, about a 2800 stall and see how that feels.
As soon as I have some decent pics I'll post them on here, but here's the basic idea.......
Thanks for the welcome.
As for the truck, the way I got it is one of those stories. Haha
Like I said, I work at a local dealership as a technician. When I started, our diesel/trans tech had the R/T that I have now. And to make a long boring story short, he got another job and left. However, before he did, his wife bought him a 06 Daytona Charger provided that he trade this truck in. So, for $4000 I got a 00 R/T with 72k with the M1 intake, Holley 52mm TB, 24 lb injectors, MOPAR headers, MSD 6BTMbox with MSD coil and MOPAR wires, full 3" single exhaust w/Dynomax and turndown, and of course, the Powerdyne S/C at 6lbs.
As far as my mods, I want to get about a .512 cam from KRC, MOPAR valve springs, about a 2800 stall and see how that feels.
As soon as I have some decent pics I'll post them on here, but here's the basic idea.......
lol, j/k thats a damn nice truck, 4k with little over 72k.. umm the damn supercharger was probably more then 4k.. damn good deal my sir, very damn good deal.
So.. you want to umm, well,, umm sell me those PPhs you got there son? KK thanks...
Thread Starter
|
Veteran
Joined: Dec 2007
Posts: 458
Likes: 1
From: Alabama
RE: Noobie...
Maybe your kit will be alittle different than mine. I got the truck with the blower on it, so I am not sure how the kit is originally assembled. My only gripes are that it uses a 6 rib instead of a 7 rib pulley and I have yet to find a way to keep the belt from slipping at 4000+ Let me know if yours is any different
Thread Starter
|
Veteran
Joined: Dec 2007
Posts: 458
Likes: 1
From: Alabama
Haha I'm doin aight I reckon. Probably going to see if I can get alittle modding done during the winter since a friend of mine got a 99 Mustang a few weeks ago, and of course the sh**-talkin has already started. I've got to get my new tailgate and roll pan painted and installed to get my girlfriend off my back and then I'm probably going to throw in a stall and get a set of MT drag radials. I think that will be enough to handle his 'stang 
Record Breaker
Joined: Oct 2006
Posts: 2,320
Likes: 1
Maybe your kit will be alittle different than mine. I got the truck with the blower on it, so I am not sure how the kit is originally assembled. My only gripes are that it uses a 6 rib instead of a 7 rib pulley and I have yet to find a way to keep the belt from slipping at 4000+ Let me know if yours is any different