2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Power Windows

Old Jul 10, 2008 | 04:35 PM
  #1  
ltduster71's Avatar
ltduster71
Thread Starter
Joined: Jul 2008
Posts: 6
Likes: 0
From:
Default Power Windows

I just replaced my Master Power Window Switch on the Drivers side. I did this because my other windows would not open independently from their own switch. I assumed my child lock-out switch was broken. (it's not)Is there a fuse or something that would prevent my passengers from opening their windows? How can I test to see if those switches are bad ?(all 3)
 
Reply
Old Jul 26, 2008 | 09:54 PM
  #2  
ltduster71's Avatar
ltduster71
Thread Starter
Joined: Jul 2008
Posts: 6
Likes: 0
From:
Default RE: Power Windows

Ok all the relays,motors, and fuses work on the power windows. I still can't get my passenger side window and two club cab windows to go up/down with their own switches. I also noticed that when the leds on the switch are lit on the drivers console, they are not lit on the passenger and rear window switches. This tells me I am not getting independent power to each switch, thus they can only be controlled by the main console. Someone please send me a schematic or link to find out which wires feed these switches independently. There are several wires connected to the auxilliary switches.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:02 AM.