2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Buying used dakota...need help! (wheel bearings, no 4x4 LOW, and PS leaking!)

Old Dec 21, 2008 | 06:17 PM
  #11  
dodgeramguy85's Avatar
dodgeramguy85
Grand Champion
Joined: Mar 2008
Posts: 5,508
Likes: 7
From: Houtzdale,PA
Default

i would keep looking. i got a 98 club cab about 4 months ago. it has 318 v8,4x4,73,000miles the truck is in almost perfect condition. it has a little bit of rust on the underside of the cab but not a whole lot(dang pa winters). paint/interior is flawless. the frame was all repainted. now for the bad only two preset buttons on the radio work, tranny is going need to be rebuilt(it doesnt like to shift when its doing about 10mph) and a rust hole on the wheel well in the bed but i got it for 5,000 the guy was trying to get 5,900 for it. its all around a good truck.
 
Reply
Old Dec 21, 2008 | 08:58 PM
  #12  
f0x672's Avatar
f0x672
Champion
Joined: Aug 2006
Posts: 2,530
Likes: 1
From: poconos, pa
Default

Originally Posted by dodgeramguy85
i would keep looking. i got a 98 club cab about 4 months ago. it has 318 v8,4x4,73,000miles the truck is in almost perfect condition. it has a little bit of rust on the underside of the cab but not a whole lot(dang pa winters). paint/interior is flawless. the frame was all repainted. now for the bad only two preset buttons on the radio work, tranny is going need to be rebuilt(it doesnt like to shift when its doing about 10mph) and a rust hole on the wheel well in the bed but i got it for 5,000 the guy was trying to get 5,900 for it. its all around a good truck.
mine doesnt want to shift either around 10 mph. also depends on how much throttle you give it. i would be more concerned with the 2-3 gear hunts if you have any.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:00 AM.