Axle vent leaky !!!
Record Breaker
Joined: Sep 2007
Posts: 1,613
Likes: 0
From: Clemson, SC
Guys notices it is a Dana 44, I have been trying to help on another forum but do not know much about problems on these axles.
On thing i am wondering is if it could be a bad bearing causing the fluid to get really hot.
On thing i am wondering is if it could be a bad bearing causing the fluid to get really hot.
Legend
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
bearing is quite possible, but usually you would hear that.
Record Breaker
Joined: Oct 2006
Posts: 2,320
Likes: 1
not necessarily. You might not hear it till it's on the frits.
What would be good is to remove the chunk and check the races, especially on the carrier, remove the pinion nut and pull that out too not too much work to remove.
What would be good is to remove the chunk and check the races, especially on the carrier, remove the pinion nut and pull that out too not too much work to remove.