2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

overdrive problems

Thread Tools
 
Search this Thread
 
  #1  
Old 07-15-2009 | 11:31 PM
mxracingfreak06's Avatar
mxracingfreak06
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default overdrive problems

I have a 1991 dodge dakota with a 318 thats two wheel drive and when i hit the overdrive button it lights up but doesn't do anything? what is wrong?
 
  #2  
Old 07-16-2009 | 12:00 AM
dakotaboy454's Avatar
dakotaboy454
Rookie
Joined: Jun 2009
Posts: 56
Likes: 0
From: Ashcroft.bc.canada
Default

when you hit the over drive button.from my understanding and how it works in my truck.is it cancels out your over drive gear so if you have a 4 speed like me it will shift down from the over drive gear to 4rth gear.

to notice any change you will have to be going well around 100 kilometers an hour.then when you hit that button you will feel/hear the truck shift down.

hope this answers your question
 
  #3  
Old 07-17-2009 | 12:20 AM
mxracingfreak06's Avatar
mxracingfreak06
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default

i did that and it doesn't do anything at like 60-65mph its runnung about 3100rpm! not so good on gas lol
 
  #4  
Old 07-17-2009 | 12:53 AM
dakotaboy454's Avatar
dakotaboy454
Rookie
Joined: Jun 2009
Posts: 56
Likes: 0
From: Ashcroft.bc.canada
Default

huh ya very wierd.mine runs like that when i hit the over drive button(light is on) and when its off(light is off) it runs around 1700rpm.
 
  #5  
Old 07-17-2009 | 01:11 AM
big.bryant's Avatar
big.bryant
Champion
Joined: Mar 2008
Posts: 4,664
Likes: 0
From: University of Colorado-Boulder
Default

could be one of two things... first your overdrive assembly probably needs adjustmant/replacement.

2nd (and less likely at this time of year) but if the transmission isn't warm enough, it won't move into OD... usually this occurs in the winter when the tranny is super cold.

BTW remember that you have 4 forward gears in your 44RE, and when OD is off, it only uses the 3 of them.

Cheers.
 
  #6  
Old 07-17-2009 | 01:45 AM
mxracingfreak06's Avatar
mxracingfreak06
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default

what would that run and where would i get one? Should napa or orilley be able to get the assembly?? thanks ,jared
 
  #7  
Old 07-17-2009 | 01:45 AM
f0x672's Avatar
f0x672
Champion
Joined: Aug 2006
Posts: 2,530
Likes: 1
From: poconos, pa
Default

Originally Posted by mxracingfreak06
i did that and it doesn't do anything at like 60-65mph its runnung about 3100rpm! not so good on gas lol
and from what you described, i feel it's safe to say your overdrive unit isnt working.. enjoy your 3 speed. tranny is gonna need work.
 
  #8  
Old 07-17-2009 | 01:53 AM
big.bryant's Avatar
big.bryant
Champion
Joined: Mar 2008
Posts: 4,664
Likes: 0
From: University of Colorado-Boulder
Default

yeah take it to a tranny shop and have them take a look at it
 
  #9  
Old 07-18-2009 | 12:01 AM
mxracingfreak06's Avatar
mxracingfreak06
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default

Ok i will see what they will say. well i get like 14 mpg but it does 3.55 rear end gears.
 
  #10  
Old 07-18-2009 | 12:23 AM
big.bryant's Avatar
big.bryant
Champion
Joined: Mar 2008
Posts: 4,664
Likes: 0
From: University of Colorado-Boulder
Default

14 from a 5.2 isn't actually that bad
 



All times are GMT -4. The time now is 05:55 PM.