View Poll Results: What do you think about the new Hemi motors.
They're Junk.
0
0%
Other Dodge Motors are just as reliable.
0
0%
Voters: 8. You may not vote on this poll
Dakota Hemi Swap!! With pics!!!
Thread Starter
|
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
Thank you to who-ever suggested I go to www.Spalding auto parts.They not only have the biggest junk yard I've ever seen,but they tried to help instead of telling me what a Dum *** I am for trying something that won't work."like everyone else does".
My wiring harness should be here some time today.It's raining here in S.C.-so even if it comes I won't have any updates until tomorrow. But I will.
My wiring harness should be here some time today.It's raining here in S.C.-so even if it comes I won't have any updates until tomorrow. But I will.
Thread Starter
|
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
pictures.
O.K. I plugged my sensors in today,now I'm trying to get the wiring in the truck hooked to the computers.Here are the photo's. hopefully I'll have this thing going this month.
I need the address to send pictures to again,it's been too long.
I need the address to send pictures to again,it's been too long.
Amateur
Joined: May 2010
Posts: 30
Likes: 0
if I attempted to do this...would I have to change my transfer case you think? are you using a flowmaster exhaust or stock or what? Ive been debating wether or not to use a hemi or go for a 4bt cummins in my 2002 qc 4x4 5.9L and am leaning towards the hemi due to being not as difficult.
Last edited by aaron580; May 10, 2010 at 09:13 PM. Reason: edit needed
Thread Starter
|
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
Sorry,I haven't been on here in a while. If you're using a 45rfe or 545rfe Trans. It will
Bold to a Hemi and you won't have to change the transfer case.
MY Lack of Knowlage is about to make me lose it.Don't depend on help if you start your project Putting the Motor in and getting everything secure is the easy part..
When the wiring comes,It's learn as you go..
Bold to a Hemi and you won't have to change the transfer case.
MY Lack of Knowlage is about to make me lose it.Don't depend on help if you start your project Putting the Motor in and getting everything secure is the easy part..
When the wiring comes,It's learn as you go..
Thread Starter
|
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
i THOUGHT I got enough wires hooked up today to try starting the truck.I can't find the starter wire for the Dakota from the main fuse box and my dash reads "NO BUS"after blinking 10 times . Can someone help???
Registered User
Joined: Jun 2010
Posts: 4
Likes: 0
Help with wiring on Dakota hemi swap
Go this site: http://dakotausa.com/vBulletin/showthread.php?t=36320
There is a hemi installation thread with pictures into a Dakota. His is running fine now, so he can probably help you with the wiring.
There is a hemi installation thread with pictures into a Dakota. His is running fine now, so he can probably help you with the wiring.
Thread Starter
|
Captain
Joined: Jan 2010
Posts: 656
Likes: 6
From: South Carolina
Can anyone tell me where the APPS wires go to on the the computer side. I need to know which pins they go to.No-one seems to know and I can't find it online.I think I have all figured out except the PK/YL "and" YL/PK...wires.
>>>>>>>>UPDATE<<<<<<<<<<
I got my transmission lines hooked up and full of tranny fluid,Hooked up my Radiator hoses,fuel line And Heater hoses yesterday.Started the motor,She runs great.Tried reverse and drive,
it moved,but I can't give it gas until I get the throttle hooked up.
I'm trying to get someone to put pictures on here for those interested.
Thanks.....
>>>>>>>>UPDATE<<<<<<<<<<
I got my transmission lines hooked up and full of tranny fluid,Hooked up my Radiator hoses,fuel line And Heater hoses yesterday.Started the motor,She runs great.Tried reverse and drive,
it moved,but I can't give it gas until I get the throttle hooked up.
I'm trying to get someone to put pictures on here for those interested.
Thanks.....