Roll bar?
#1
![Lightbulb](https://dodgeforum.com/forum/images/icons/icon3.gif)
I'm thinking of building my own roll bar located behind my cab with a row of 4 bright lights across. It'll be easier to just keep it black but that's fine with me. Would I have to cut a hole in the box to mount it to the frame? Or would it fit right down behind the cab? Also any other suggestions would help
#2
#3
#4
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
mount to the top of the box rails... as long as your not using it for protection and it's more for lights.. it should be fine. I Tie my dirtbike down to there sometimes.
#6
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
As long as it had 2 bolts for each leg then it will be fine just bolted most roll bars that are aftermarket have 4 holes for each leg but you dont need that many. This is the roll bar in my buddys ram 2 go to the bed floor and 2 go on top of the wheel well. and actually the front 2 legs only have 1 bolt each cause to go to the other side was too much of a pain.
0816091814a.jpg
0816091814a.jpg
Last edited by dodgeramguy85; 02-17-2010 at 01:13 PM.