Roll Call !! Post up your pics of your Dakota!!
Registered User
Joined: Mar 2012
Posts: 10
Likes: 0
[IMG]https://dodgeforum.com/forum/dakota003.jpgdakota003.jpg
318 Small Block (complete Rebuild 3,000 Miles Ago)
Compression 9.5:1
Transmission:
Shift Kit (Adjustable Shift Points) (Still has O/D)
Body has 137,000 miles on it
MSD 6A Box
B&M Pro Stick Shifter
ProComp Electronics With Adjustable Timing
Upgraded Dodge Dakota ECU
Aftermarket Shorty Headers
Flowmaster Single Chamber Dump Just After Cab
Traction Bars
Heads Ported To Match Headers
40/25 Wet Kit Spray (Disconnected) Estimated 60 Shot
Moroso Valve Covers
After Market Centerline Rims (Fronts are 215/60R/16, Rear 29/12.5/16 Slick (Currently Off of truck and Stock on)
No A/C but has Heat
318 Small Block (complete Rebuild 3,000 Miles Ago)
Compression 9.5:1
Transmission:
Shift Kit (Adjustable Shift Points) (Still has O/D)
Body has 137,000 miles on it
MSD 6A Box
B&M Pro Stick Shifter
ProComp Electronics With Adjustable Timing
Upgraded Dodge Dakota ECU
Aftermarket Shorty Headers
Flowmaster Single Chamber Dump Just After Cab
Traction Bars
Heads Ported To Match Headers
40/25 Wet Kit Spray (Disconnected) Estimated 60 Shot
Moroso Valve Covers
After Market Centerline Rims (Fronts are 215/60R/16, Rear 29/12.5/16 Slick (Currently Off of truck and Stock on)
No A/C but has Heat
Rookie
Joined: Oct 2006
Posts: 74
Likes: 0
From: Apalachin, NY
04 dakota
105_0183.jpg
105_0182.jpg
105_0173.jpg
04 4.7L dakota
Dual intake w/ K&N Filters
Cherry bomb Dual Exhaust
105_0182.jpg
105_0173.jpg
04 4.7L dakota
Dual intake w/ K&N Filters
Cherry bomb Dual Exhaust
Registered User
Joined: Jun 2011
Posts: 5
Likes: 0
Well I figured I should post some pictures of my baby. Some info on the truck.
Its an 01 sport
lowered 2" front and 2" rear
Unfortunately still has the 3.9 although I am on the lookout for a 5.9.
The hood began life as a stock Dakota hood. We cut the scoops off a 71 Challenger. The scoop had to have a couple of inches cut out of the middle then welded back together, then welded onto the hood.
The front bumper is custom made from a dakota bumper and a bumper from an intrepid riveted and fiber glassed together.
Gas cab is also from a 71 Challenger.
The first 3 pictures were taken a while ago. The next few were taken 2 weeks ago after some lovely old lady drove into the side of me.
IMG_20110516_074225.jpg
IMG_20110516_074217.jpg
IMG_20110516_074232.jpg
Now for the sad pictures.
2012-02-22084018.jpg2012-02-22083950.jpg
2012-02-22084027.jpg
This weekend Im picking up a parts truck so I can get her all fixed up. Cost of a door from the wreckers was $300. Cost of the parts truck im picking up $400. will take some parts, then part out the rest and I should make more than my $400 back.
I do have some pictures from when the hood etc.. were being built. I will look for them and add them later. Also not sure if im going to keep the same color when I repaint her. Any thoughts on what color she should go??
Its an 01 sport
lowered 2" front and 2" rear
Unfortunately still has the 3.9 although I am on the lookout for a 5.9.
The hood began life as a stock Dakota hood. We cut the scoops off a 71 Challenger. The scoop had to have a couple of inches cut out of the middle then welded back together, then welded onto the hood.
The front bumper is custom made from a dakota bumper and a bumper from an intrepid riveted and fiber glassed together.
Gas cab is also from a 71 Challenger.
The first 3 pictures were taken a while ago. The next few were taken 2 weeks ago after some lovely old lady drove into the side of me.
IMG_20110516_074225.jpg
IMG_20110516_074217.jpg
IMG_20110516_074232.jpg
Now for the sad pictures.
2012-02-22084018.jpg2012-02-22083950.jpg
2012-02-22084027.jpg
This weekend Im picking up a parts truck so I can get her all fixed up. Cost of a door from the wreckers was $300. Cost of the parts truck im picking up $400. will take some parts, then part out the rest and I should make more than my $400 back.
I do have some pictures from when the hood etc.. were being built. I will look for them and add them later. Also not sure if im going to keep the same color when I repaint her. Any thoughts on what color she should go??
Registered User
Joined: Feb 2012
Posts: 9
Likes: 0
Freshly washed
2002 QuadCab SLT. 4.7L, Auto trans, Cherry bomb muffler, Blazer fogs, Alpine stereo, Line-X Bedliner
155,500 miles
http://i1079.photobucket.com/albums/...r/DSCF0069.jpg
155,500 miles
http://i1079.photobucket.com/albums/...r/DSCF0069.jpg
Professional
Joined: Aug 2006
Posts: 103
Likes: 1
From:
Well I figured I should post some pictures of my baby. Some info on the truck.
Its an 01 sport
lowered 2" front and 2" rear
Unfortunately still has the 3.9 although I am on the lookout for a 5.9.
The hood began life as a stock Dakota hood. We cut the scoops off a 71 Challenger. The scoop had to have a couple of inches cut out of the middle then welded back together, then welded onto the hood.
The front bumper is custom made from a dakota bumper and a bumper from an intrepid riveted and fiber glassed together.
Gas cab is also from a 71 Challenger.
The first 3 pictures were taken a while ago. The next few were taken 2 weeks ago after some lovely old lady drove into the side of me.
This weekend Im picking up a parts truck so I can get her all fixed up. Cost of a door from the wreckers was $300. Cost of the parts truck im picking up $400. will take some parts, then part out the rest and I should make more than my $400 back.
I do have some pictures from when the hood etc.. were being built. I will look for them and add them later. Also not sure if im going to keep the same color when I repaint her. Any thoughts on what color she should go??
Its an 01 sport
lowered 2" front and 2" rear
Unfortunately still has the 3.9 although I am on the lookout for a 5.9.
The hood began life as a stock Dakota hood. We cut the scoops off a 71 Challenger. The scoop had to have a couple of inches cut out of the middle then welded back together, then welded onto the hood.
The front bumper is custom made from a dakota bumper and a bumper from an intrepid riveted and fiber glassed together.
Gas cab is also from a 71 Challenger.
The first 3 pictures were taken a while ago. The next few were taken 2 weeks ago after some lovely old lady drove into the side of me.
This weekend Im picking up a parts truck so I can get her all fixed up. Cost of a door from the wreckers was $300. Cost of the parts truck im picking up $400. will take some parts, then part out the rest and I should make more than my $400 back.
I do have some pictures from when the hood etc.. were being built. I will look for them and add them later. Also not sure if im going to keep the same color when I repaint her. Any thoughts on what color she should go??
