2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

2002 Dodge Dakota

Thread Tools
 
Search this Thread
 
Old Nov 6, 2010 | 05:59 PM
  #1  
skrapper78's Avatar
skrapper78
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 2
Likes: 0
Default 2002 Dodge Dakota

Ok I have a 2002 Dodge Dakota heres the problem I am having it will crank but will not start but a very few times it will start but not start again but when it dont wanna start none of the gauges will work and the millage will flash and say NO BUS? Here are some of the things I have tried so far bought new battery terminals And rented a code reader from auto zone and no codes where shown Then I Turned the ignition off. Pressed and held the odometer/trip button while turning igntion to "on" without turning it to the "start" position. And Continued to held the button for 10 seconds...until I seen the odometer window display "CHEC". If there was a problem, a three digit code will appear. And these 3 different codes came up 920, 921 What else can I do HELP!!!!!!
 
Reply
Old Nov 7, 2010 | 10:42 PM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

I will move this to the 2nd Gen. Dakota section.
 
Reply
Old Nov 7, 2010 | 10:59 PM
  #3  
midget-farms's Avatar
midget-farms
Professional
Joined: Aug 2010
Posts: 188
Likes: 0
From: Dunlap IL
Default

Not sure - but no bus could mean you have a main fues blown. Take a look at the power distribution center under the hood. Large black box. Take the lid off & there are a ton of fuses & brakers in there. Start there.
 
Reply
Old Nov 8, 2010 | 11:46 AM
  #4  
skrapper78's Avatar
skrapper78
Thread Starter
|
Registered User
Joined: Nov 2010
Posts: 2
Likes: 0
Default

I did that
 
Reply




All times are GMT -4. The time now is 06:22 PM.