4.7 to 5.9 swap
#1
4.7 to 5.9 swap
How easy will this be? Has anyone tried it?
I know the 3.9 to 5.9 is almost bolt and go, I've done a few of these.
So here's my plans; take a 4door 2gen and turn it into a R/T
What I do have is the 5.9, Trans, engine harness, computer and all things necessary to drop it in.
What I don't have is the truck which I'm hunting as I speak.
What I have found is a boat load of 4.7L that I could pick up for cheap, there's not as many 3.9L to choose from in a quadcab...
So I'm wondering if the 4.7 is (close) to as easy to swap????
Any ideas out there?
I know the 3.9 to 5.9 is almost bolt and go, I've done a few of these.
So here's my plans; take a 4door 2gen and turn it into a R/T
What I do have is the 5.9, Trans, engine harness, computer and all things necessary to drop it in.
What I don't have is the truck which I'm hunting as I speak.
What I have found is a boat load of 4.7L that I could pick up for cheap, there's not as many 3.9L to choose from in a quadcab...
So I'm wondering if the 4.7 is (close) to as easy to swap????
Any ideas out there?
#3
Well...I highly recommend not dealing with the 4.7L vehicle to do this swap, imho. Believe me...it takes alot of time. I mean, don't get me wrong, you can do it if you're willing to put that much time into it. There's a guy on here that dropped in a hemi swapping from a 4.7L (I think?) Someone can confirm that for me. All depends on what you want to do.
#4
#5
I own a hemi in my Ram. As much as I like it I believe the 5.9 is just as stout and reliable. Pluss it will have a few goodies thrown in it for good measure lol.
I already have a 5.9 full engine/trans combo so no need to hunt down a hemi and such...
I know a 5.7 will go into a 4.7 I've assisted in a Ram conversion.
I knew the 4.7 to 5.9 was a long shot and I know it is possible (anything is possible lol) I was just hopeing it would be as simple as swapping pins in the ECM or something...
I already have a 5.9 full engine/trans combo so no need to hunt down a hemi and such...
I know a 5.7 will go into a 4.7 I've assisted in a Ram conversion.
I knew the 4.7 to 5.9 was a long shot and I know it is possible (anything is possible lol) I was just hopeing it would be as simple as swapping pins in the ECM or something...