O2 sensors installed - bugger!
#1
03-19-2011, 07:27 PM
Join Date: Feb 2008
Location: Littleton, CO
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
O2 sensors installed - bugger!
Tomorrow may be the first day of spring but I've got my spring tune-up and 100K maintenance done!
Had the dealer do the tranny service (I hate messing with fluids) but I changed out the O2 sensors and did a few other periodic maintenance items myself.
Read a number of posts on this forum regarding installation of new O2 sensors. Best advice I heeded was to hose them down with penetrating lubricant (PB Blaster stuff) LAST NIGHT before going to bed. That gave it about 8 hours to do it's thing. I got an early start this morning thinking I'd be a while getting those things loose (I'm 98% sure they were stock) but the penetrating lub made all the difference. It was cake getting them off. Unplugging the pre-cat sensor though was a PITA!!! Thankfully whoever engineered the plug made it so you press down to release the clip. I figured that out on the post-cat sensor first.
So, hopefully this post will help someone else in the future. I just have two sensors, on the passenger side. If you've got big hands, maybe see if you can bribe your kid or a neighbor with small hands to help you get the old pre-cat sensor unplugged and re-installed. That alone took me about 30 minutes total to contort myself and really busted up my knuckles getting the old out and the new in.
Had the dealer do the tranny service (I hate messing with fluids) but I changed out the O2 sensors and did a few other periodic maintenance items myself.
Read a number of posts on this forum regarding installation of new O2 sensors. Best advice I heeded was to hose them down with penetrating lubricant (PB Blaster stuff) LAST NIGHT before going to bed. That gave it about 8 hours to do it's thing. I got an early start this morning thinking I'd be a while getting those things loose (I'm 98% sure they were stock) but the penetrating lub made all the difference. It was cake getting them off. Unplugging the pre-cat sensor though was a PITA!!! Thankfully whoever engineered the plug made it so you press down to release the clip. I figured that out on the post-cat sensor first.
So, hopefully this post will help someone else in the future. I just have two sensors, on the passenger side. If you've got big hands, maybe see if you can bribe your kid or a neighbor with small hands to help you get the old pre-cat sensor unplugged and re-installed. That alone took me about 30 minutes total to contort myself and really busted up my knuckles getting the old out and the new in.
