2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

UGHHHH someone got a stick of c4!!

Thread Tools
 
Search this Thread
 
  #1  
Old 07-16-2011, 09:54 PM
atthewmartin114's Avatar
atthewmartin114
atthewmartin114 is offline
Veteran
Thread Starter
Join Date: Feb 2011
Location: New york
Posts: 425
Likes: 0
Received 2 Likes on 2 Posts
Default UGHHHH someone got a stick of c4!!

this is pissing me off before i had no shifting abilty got a little bit after pulling the slave and master out and rebuilding them. then it still didnt really like 1st and rev which is what ever idc about that its not like i use 1st anyway. now comes the best part. truck warms up and i cant shift at all what do ever unless the truck is moving. no gears nothing. trucks off and it shifts just fine. truck on and in gear your on but if you start in nutrual your ****ed unless you slam it in to gear. anyone have ideas please anything is better then nothing.

Btw its a 1997 5.2L Nv 3500 club sport. brand new clutch and flywheel and pressure plate.
 
  #2  
Old 07-17-2011, 04:53 PM
chris1996's Avatar
chris1996
chris1996 is offline
Veteran
Join Date: Jul 2011
Location: costa rica
Posts: 412
Likes: 0
Received 0 Likes on 0 Posts
Default

it could be the clutch pump... mine happened almost the same and was it but now i need to change the clutch
 
  #3  
Old 07-17-2011, 06:10 PM
Hahns5.2's Avatar
Hahns5.2
Hahns5.2 is offline
Record Breaker
Join Date: Mar 2009
Location: Battle Ground WA
Posts: 2,181
Likes: 0
Received 2 Likes on 2 Posts
Default

There's air in the system.
 
  #4  
Old 07-17-2011, 08:50 PM
atthewmartin114's Avatar
atthewmartin114
atthewmartin114 is offline
Veteran
Thread Starter
Join Date: Feb 2011
Location: New york
Posts: 425
Likes: 0
Received 2 Likes on 2 Posts
Default

clutch pump??? its manual there is no clutch pump. and af far as the master system idk i have bled it a 100 times im thinking about just buying a brand new one but there like 300 and i cant find one thats less.
 
  #5  
Old 07-18-2011, 07:25 AM
DakMan6704's Avatar
DakMan6704
DakMan6704 is offline
Captain
Join Date: Feb 2004
Location: PA
Posts: 595
Likes: 0
Received 0 Likes on 0 Posts
Default

Check your shifting fuel level.

But seriously, clutch doesnt disengage, air in system. Be like spongey brake pedal. did you bench bleed your mast. cyl?
 
  #6  
Old 07-18-2011, 10:24 PM
chris1996's Avatar
chris1996
chris1996 is offline
Veteran
Join Date: Jul 2011
Location: costa rica
Posts: 412
Likes: 0
Received 0 Likes on 0 Posts
Default

yes there is a clutch pump or hidraulic transmicion pump i dont know the name of it but there is here they sole it with all and daks have a sealed system it starts in the oil pot for the clutch system
 
  #7  
Old 07-18-2011, 11:00 PM
atthewmartin114's Avatar
atthewmartin114
atthewmartin114 is offline
Veteran
Thread Starter
Join Date: Feb 2011
Location: New york
Posts: 425
Likes: 0
Received 2 Likes on 2 Posts
Default

thats and automatic tranny bud.... and yeah i bench bleed it and i bleed it in the truck. too and it doesnt really like to shift either way. im gonna keep it the way it is now then buy a new slave and master cylinder
 



Quick Reply: UGHHHH someone got a stick of c4!!



All times are GMT -4. The time now is 09:39 AM.