Well I guess I can update this thread alil So life has been a very up and down roller coaster for these past couple months. So the cab cage has been put on hold. I made a very big decision due to the fact that I went through 5 wheel hubs in 2.5 months. So here is the new spindle.
Specs:
D44 Snout
1/4" chromoly plate
96 F150 Hubs and rotors.
GM Brake calipers and pads. It is in the laser cut process at the moment. So I do have the CAD design of it. It will also make it 1.5" wider per side.


With the new lug patter comes with new rims so I bought these 5 procomp rims for 300 bucks:


I also gathered a set of tires: 35" BFG Short Course Tires for 300 bucks
602693_127654724082751_719962528_n_zpsaa6c6029.jpg

And since I will co-driving in my buddies race yota I did pick up a helmet as well which is wired and plumbed for parker pumpers and intercoms for 80 bucks

481825_127654920749398_2033164381_n_zps9b19adf2.jpg

I have also gathered 2 front lights to go on the front bumper once the time comes as well as two more rear lights to mount on my cage for extra break lights. No pictures of these at the moment. But I will post pictures once the spindles are completely done and on the truck!!!

 

waiting to see it finished

 

only set back right now is laser cut. they are swamped. other than that I have everything ready to go for the spindle swap

 

please keep us updated my dak needed to go is no longer mine

 

dang that sucks!

 

well finally got the beast updated...
new spindles are on as well as the bfg short course tires.
Trackwidth went from 80" to 86"

enough talk here are some pictures.
DSC02185_zps9e9a5b7f.jpg

DSC02186_zpsef98cee2.jpg
pretty welds
DSC02188_zps5477130e.jpg

had the front coilovers rebuilt. they were hydrolocked but replaced all seals and now it rides even better with functional shocks! I also ditched the zipties to the frame and went and got some hose clamps and resi mounts
DSC02189_zps403f5705.jpg

DSC02192_zps5cb0e5c0.jpg

and the overall picture

DSC02191_zpsfaf5537c.jpg

 

nice job

 

Thank you

 

So pumped for you man. Such a dope stance. Wht did you do with the rear about the mew lug pattern? Adaptors? Or unmatching rums?

 

running unmatching rims. Dont truly care about other peoples opinions about rims haha i will get a 9" in eventually but have other stuff to address first haha