2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

oil psi

Thread Tools
 
Search this Thread
 
  #1  
Old 12-20-2011, 03:41 PM
rich1374670x's Avatar
rich1374670x
rich1374670x is offline
Amateur
Thread Starter
Join Date: Nov 2011
Location: MASS
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default oil psi

I started driving my car more frequently a couple of years ago. My 03 Dakota with the 4.7 didn't see much use. I would run it 1/2 times a week but not always. Sometimes, or if it sat for a while when I would start it, it said check gauges. I would shut it off and restart it and it was fine. The gauge would read 0 and on the second start be normal. I sold my car and this is my daily driver again. It has been fine but twice last week it read 0 and said check gauges. When it ran at 0 psi, no strange noises or such. Really didn't let it run too lpng either. 125,000 miles, regular cab sport 4x4. Any thoughts? I have owned since new, thanks.
 
  #2  
Old 12-20-2011, 03:45 PM
bwdakrt's Avatar
bwdakrt
bwdakrt is offline
Record Breaker
Join Date: Dec 2008
Location: Claremont NC
Posts: 1,201
Likes: 0
Received 1 Like on 1 Post
Default

How long since an oil and filter change and what brands & weight are you using?

Could also be a bad oil pressure switch causing the problem.
 
  #3  
Old 12-20-2011, 04:36 PM
rich1374670x's Avatar
rich1374670x
rich1374670x is offline
Amateur
Thread Starter
Join Date: Nov 2011
Location: MASS
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

1,500 miles ago, Mobil 1 0w30
 
  #4  
Old 12-20-2011, 05:05 PM
bwdakrt's Avatar
bwdakrt
bwdakrt is offline
Record Breaker
Join Date: Dec 2008
Location: Claremont NC
Posts: 1,201
Likes: 0
Received 1 Like on 1 Post
Default

Then I'd definitely think about replacing the oil pressure switch. It's located just above the oil filter.
 




All times are GMT -4. The time now is 11:08 PM.