2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Help with turn signals

Old May 7, 2012 | 01:43 PM
  #1  
earthur33's Avatar
earthur33
Thread Starter
|
Registered User
Joined: May 2012
Posts: 8
Likes: 0
Default Help with turn signals

all turn signals and Hazards are gone! Soo what I've done so far with no solving is... replaced the module under the dash and checked the fuses under the hood and the fuse box near the drivers side door... Any other idea's?
 
Reply
Old May 8, 2012 | 08:49 PM
  #2  
moe7404's Avatar
moe7404
Record Breaker
Joined: Jul 2007
Posts: 2,040
Likes: 1
From:
Default

iam not sure but i think the power might go through the ignition switch. dumb me i need to look at my service manual. ill take a look and get back to you. find the junction block, run-acc-a31, check the fuse 19 10a . and power distribution center, batt A0 fuse 1 30A. there is lots more but to much to run down now. i dont know where those things are.
 

Last edited by moe7404; May 8, 2012 at 08:59 PM.
Reply
Old May 9, 2012 | 10:25 AM
  #3  
earthur33's Avatar
earthur33
Thread Starter
|
Registered User
Joined: May 2012
Posts: 8
Likes: 0
Default

Ok I'll check those things....More info. the turn signal module makes one "click" when the stick is moved either for left or right turn (up or down)however, there are no lights on the dash board nor do the turns signal lights flash at all
 
Reply
Old May 9, 2012 | 10:28 AM
  #4  
earthur33's Avatar
earthur33
Thread Starter
|
Registered User
Joined: May 2012
Posts: 8
Likes: 0
Default

Also, I don't know of any other function that is not working as it should
 
Reply
Old May 9, 2012 | 10:30 AM
  #5  
earthur33's Avatar
earthur33
Thread Starter
|
Registered User
Joined: May 2012
Posts: 8
Likes: 0
Default

thx Moe!
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:20 AM.