97 Dodge Dakota 4x4 accuation
Thread Starter
|
Registered User
Joined: Jun 2012
Posts: 4
Likes: 0
97 Dodge Dakota 4x4 accuation
Recently, my girlfriends parents purchased a 97 dodge dakota sport 4x4, having a few issues with 4wd. I know on the 1500 front monobeam, there is a vacuum actuator in the front axle that engages 4x4. Just curious how 4x4 was accuated on the IFS suspension. Thanks.
Section Moderator
Joined: Dec 2010
Posts: 4,858
Likes: 47
From: MA
What are the issues she's having?
There are no actuators on the front axle. If you're moving then everything turns all the time on a Dakota, there are no hubs that you can unlock. The only place that can disconnect is at the transfer case itself.
It's a simple system. The linkage is all mechanical at the transfer case as to gear selection.
There are no actuators on the front axle. If you're moving then everything turns all the time on a Dakota, there are no hubs that you can unlock. The only place that can disconnect is at the transfer case itself.
It's a simple system. The linkage is all mechanical at the transfer case as to gear selection.