2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Transmission I.D. and rear end I.D.

Thread Tools
 
Search this Thread
 
Old Jun 23, 2012 | 01:02 AM
  #1  
mmguy18's Avatar
mmguy18
Thread Starter
|
Veteran
Joined: Nov 2011
Posts: 427
Likes: 0
From: St Clairsville Oh
Default Transmission I.D. and rear end I.D.

Is there another I.d plate that will identify my transmission and rear end. I have the one under the pass seat but it did not help with tranny and rear end. There is no tag on the rear end.
 
Reply
Old Jun 23, 2012 | 03:45 AM
  #2  
bwdakrt's Avatar
bwdakrt
Record Breaker
Joined: Dec 2008
Posts: 1,200
Likes: 1
From: Claremont NC
Default

There's a sticker inside the glove box with the info.
 
Reply
Old Jun 23, 2012 | 09:41 PM
  #3  
moe7404's Avatar
moe7404
Record Breaker
Joined: Jul 2007
Posts: 2,040
Likes: 1
From:
Default

this inf is from a 2001 dakota paper book from the factory,service manual. the body code plate, line 2 , digits 1,2,3. trans code. DDK=5-speed manual (NVG 1500)......DDQ=5 speed manual (AX15)........DDC=5 speed manual (NVG 3500).......DGK=4 speed auto (42RE)......DGW=4 speed auto (44RE)..........DGT4 speed auto (46RE). on the trans side rail left side above the pan is, 1..part number,2 build date, 3 serial number.. ii THINK 2 of the trans,s are realy the a little alike, but i dont know which ones. the rear end is easy. the 8 1/4 rear has 10 bolts on the pan cover, and tha sides of the fan are round. a 9 1/4 rear end has 12 bolts on the pan,and the edges of the pan have flat spots, if looks flat its a 9 1/4. EDIT: i hope i didnt make any mistakes. i think next time ill use a different format
 

Last edited by moe7404; Jun 24, 2012 at 03:31 PM.
Reply
Old Jun 24, 2012 | 02:01 AM
  #4  
mmguy18's Avatar
mmguy18
Thread Starter
|
Veteran
Joined: Nov 2011
Posts: 427
Likes: 0
From: St Clairsville Oh
Default

Thanks
I have to check tranny but it is a 4spd auto.The rear is a 9 1/4
 
Reply




All times are GMT -4. The time now is 09:52 AM.