How do you disassemble the headlight assembly to only have the corner light and turn signals? I need to get to either the side or the bottom of the corner lights to install hideaway LEDs. (emergency lighting)
Thanks
-Jm5

 

The headlight stays attached to the truck, the corner and amber are held on by 3 torx screws I believe, then slide straight out.

I think the rubber grille seal (if yours is still there) hides the 3rd bolt + retains the assembly. You have to partially remove it..if you don't, you'll figure it out pretty quick.

 

i've taken them off to tint the turn signals and i found the 3 bolts. what size torx to disassemble?

 

I dont remember. I want to say a T10.

What are the LED's for? Have a source? Might make me impulse buy...I get my stuff from mouser but it's not water/carwash proof. I'm intending to get my FCC license for the HAM radio I have, register as a radio operator, and go to the free storm spotter seminars to get started in that.

 

They're for responding. I'm on the FD in my town and we can have LED lights or strobes or whatever.

https://www.speedtechlights.com/prod...&catid=9&id=54

I got em on sale for 140 at an expo over the weekend

 

Ohhh so you're drilling the housings to fit those in. I see now. I thought you meant LED strips like these (ok, now I might impulse buy): http://www.superbrightleds.com/morei...-circuit/1000/

I use the non-waterproof 20" ones from Mouser, and they're bright as f!!!!!!!

I've actually been given a warning for too many light beams...HID fogs in OEM location, halogen driving lights in the lower bumper/grille, and low beam headlights (non HID). Said I can only have 4 at a time.

But if I go into storm spotting (which I'm leaning to doing), I'll take all the LED's I can get, esp on the backside.

 

I love storm chasing, even if its just me and my friends chasing a BS thunderstorm around. Lightwise though, I'm doing 2 blue ones in the corners, and 2 reds in the tail lights, an arrow stick, and a dash light and probably a few grille lights

 

My headlights just used 3 10mil head screws, the only torx was holding the marker lights to the headlight

 

thanks for the info guys. Will post pix when the lights finally come in (prob 3-4 weeks)

 

I wanted to get some for my ram. I saw a set on ebay that came with 8 lights fot 97.00. I wanted to get them so bad lol