2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

99 dakota will not start

Thread Tools
 
Search this Thread
 
Old Oct 25, 2012 | 05:32 PM
  #1  
redeye4u's Avatar
redeye4u
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 6
Likes: 0
From: wisconsin
Smile 99 dakota will not start

Hi all. Went out last saturday to hook up the boat and go fishing. For some reason my truck would crank but not start. It ran a week or so ago.The fuel pump starts and cycles. There is no spark out of the coil, and it seems the injectors are not cycling. No gas smell after several cranking attemps. No codes show up on the scanner. The weird part is while i am cranking the check gages light comes on. Than the abs light will come on shortly after the check gages light. if anybody could steer me in the right direction that would be helpfull. Thanks.
 
Reply
Old Oct 25, 2012 | 05:36 PM
  #2  
redeye4u's Avatar
redeye4u
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 6
Likes: 0
From: wisconsin
Default

sorry guys. 5.2 auto 4wd 109000 miles
 
Reply
Old Oct 25, 2012 | 08:31 PM
  #3  
Tom A's Avatar
Tom A
Section Moderator
Joined: May 2012
Posts: 1,564
Likes: 9
From: Concord, CA
Default

I had the same problem just recently and it was a bad coil. I would have sworn my injectors weren't firing (no gas smell at the tailpipe), but that wasn't the case.
 
Reply
Old Oct 26, 2012 | 06:00 AM
  #4  
redeye4u's Avatar
redeye4u
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 6
Likes: 0
From: wisconsin
Default

thanks Tom A i will check into that.
 
Reply
Old Oct 27, 2012 | 12:28 PM
  #5  
redeye4u's Avatar
redeye4u
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 6
Likes: 0
From: wisconsin
Default

went out last night, gave the computer a little tap with a screw driver. truck started and ran for about 30 seconds. now i can smell gas when trying to start. but still no fire. i figure it must be the computer. dodge wants 525.00 to replace. is there a better place to find a computer. please help this is not my daily driver. but i still want it to run. thanks for all the helpl.
 
Reply
Old Oct 27, 2012 | 01:20 PM
  #6  
RYCOMA79's Avatar
RYCOMA79
Professional
Joined: Jan 2012
Posts: 213
Likes: 0
Default

did you check the primary and secondary reistance on the coil and the voltage from the PCM to trigger the coil. and yes you can get a new PCM from rock auto or off eBay they usually have to be flashed at the dealer
 
Reply
Old Oct 28, 2012 | 01:21 AM
  #7  
RYCOMA79's Avatar
RYCOMA79
Professional
Joined: Jan 2012
Posts: 213
Likes: 0
Default

also in your fuse panel there is a fuse for the coil as well
 
Reply
Old Oct 28, 2012 | 11:39 PM
  #8  
moparplowjockey's Avatar
moparplowjockey
Registered User
Joined: Aug 2011
Posts: 21
Likes: 0
Default

Check your cap and rotor. I had a 2001 Ram with 5.9L and it did the same thing. The rotor contact wears down to nothing. Runs fine then shut it off went back next day and no start.
 
Reply
Old Oct 29, 2012 | 03:21 AM
  #9  
redeye4u's Avatar
redeye4u
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 6
Likes: 0
From: wisconsin
Default

thanks for the advice guys. i will be getting a computer from all computers resource today. will go from there. thanks agian.
 
Reply
Old Oct 29, 2012 | 05:44 PM
  #10  
Trent479's Avatar
Trent479
Veteran
Joined: Apr 2011
Posts: 328
Likes: 0
From: San Jose
Default

put the computer in, if that doesnt work i would check the coil. that seems to be a big issue in those motors
 
Reply



All times are GMT -4. The time now is 09:39 PM.