2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

frustrated in Ohio

Thread Tools
 
Search this Thread
 
Old Jun 7, 2013 | 07:12 PM
  #1  
Skotra's Avatar
Skotra
Thread Starter
|
Registered User
Joined: Jun 2013
Posts: 2
Likes: 0
From: ohio
Unhappy frustrated in Ohio

Hello,I have a 2002 Dakota quadcab sport w/3.9.For the past 2 wks I have been having issues.I get in truck then put key in ignition then headlights start to flash,gate open,brake warning light & cargo lamp on starts flashing on the dash along with the door chime going off anyone know what could cause this.Other than this all gauges r working fine & truck runs well.
 
Reply
Old Jun 8, 2013 | 01:22 AM
  #2  
DaisyDakota's Avatar
DaisyDakota
Registered User
Joined: May 2013
Posts: 14
Likes: 0
Default

have you checked the fuses and relays? thats where i would start and you could take it to a shop that can get you the codes off a computer but be careful they could be wrong these trucks will have something simple wrong like a bad battery and throw all kinds of wack codes.

and i cant seem to get my pics to work help please?
 
Reply
Old Jun 8, 2013 | 09:44 AM
  #3  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Welcome to DF. I'll move your post to the correct dakota section.
 
Reply
Old Jun 8, 2013 | 10:29 AM
  #4  
98DAKAZ's Avatar
98DAKAZ
Champion
10 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jul 2011
Posts: 4,895
Likes: 35
From: Gilbert, Arizona
Default

Sounds like one of two things a poor or bad ground or your central timing unit is crapping out on you look at your under dash grounds first check the service manual.
 
Reply
Old Jun 12, 2013 | 04:11 PM
  #5  
Skotra's Avatar
Skotra
Thread Starter
|
Registered User
Joined: Jun 2013
Posts: 2
Likes: 0
From: ohio
Default ctm

Is it possible to run 02 Dakota without ctm installed?
 
Reply
Old Jun 13, 2013 | 12:47 PM
  #6  
Robbadodge's Avatar
Robbadodge
Veteran
Joined: Sep 2012
Posts: 380
Likes: 0
From: Signal Mountain, TN
Default

Originally Posted by Skotra
Is it possible to run 02 Dakota without ctm installed?
no no no and no. the system wouldn't let me post just a single "no"; perhaps I got carried away.
 
Reply
Old Jun 13, 2013 | 07:12 PM
  #7  
dodgeramguy85's Avatar
dodgeramguy85
Grand Champion
Joined: Mar 2008
Posts: 5,508
Likes: 7
From: Houtzdale,PA
Default

You can check codes by turning the key to the on position 3 times in a row.(On-off-on-off-on. About 1 or 2 sec delay when you are in the on position) Any codes will be displayed in the odometer. Im betting none will be but you never know. As far as the problem im betting its the ctm. You can get one from a junk yard but it must have all the same features your truck does. Easiest route is order one from the dealer(call around to a few and find the lowest price) When you get it dont let them install it. They will most likely charge you like 50.00 to do it when it literally takes 5 min to do and is easily accessible(behind the driver side kick panel below the parking brake) The dealer will need to program it if you have keyless entry.
 
Reply




All times are GMT -4. The time now is 09:54 AM.