i have a problem with my truck the coil shows spark but the wires going to each plug they are not getting spark i replaced the crank position sensor
and still the same problem just was driving down the road and it stalled out and would never start again ..could the pick up coil cause this problem.
sure could use some help with this

 

could it be the pick up coil,,or what else would cause this problem

 

What year and motor do you have in it that would help

 

1999 dodge dakota motor is 3.9 liter magnum

 

Also check camshaft position sensor

 

same thing as pick up coil mentioned above

and YES it could very well be the distributor pickup causing it to not start

 

there is no cam shaft position sensor on this truck...how do you check the pick up coil with a tester on ohms thanks

 

when i test the pick up coil i get a reading of 18000 does this mean that it is a good reading or a bad one.....

 

look at post directly above this one cam sensor and distributor pickup = SAME THING

18000 ohms=BAD

 

well i replaced the crank sensor the pick up coil dont no what else to do i am stumped only thing to do now is change the pcm,,well if any body has any ideas
let me know it would be greatly appreciated