need help jumping the pigtail that was in my automatic trans so when i get done with the swap i will be able to start my truck up and all!!!!

 

And I also need help on how to turn off the transmission temp light since the automatic transmission is being taken out?

 

FSM should show the neutral switch...I believe it gets replaced by a clutch safety switch.

Also, the trans temp light runs through the PCM on the communications buss for the transmission. In addition to that light being on, you'll likely get a whole slew of P codes for improper RPM drop, open connection to convertor solenoid, open connection to overdrive solenoid, trans too hot, among others.