Swaybars...
Thread Starter
|
Hall Of Fame
Joined: Jan 2004
Posts: 12,942
Likes: 308
Swaybars...
I went to go change the sway bar bushings on the wifes truck and found that they are a massive 33mm. anyone looking to improve cornering on their ram could use this bar for sure. It is on an '02 CC Dakota... I should also add that I was un-able to find a urethane kit for it. It'll have to be a universal setup.
Registered User
Joined: Mar 2006
Posts: 27
Likes: 0
From: Colorado
RE: Swaybars...
Steve,
Do you or anyone else know what size the front sway bar is on a 2000 Dodge 1500 QC 4X4? I tried the dealer and when looking up the last eight of my vin found out they just list a part# for replacemants not an actual size. I was told the sway bar is the same size from 1/2 ton to 1 ton but cannot find out what the actual size. From what I have been told it is either a 30mm or a 32mm. I am wanting to replace the cracked and worn out bushings with a urethane kit for it. Thanks in advance!!!
Do you or anyone else know what size the front sway bar is on a 2000 Dodge 1500 QC 4X4? I tried the dealer and when looking up the last eight of my vin found out they just list a part# for replacemants not an actual size. I was told the sway bar is the same size from 1/2 ton to 1 ton but cannot find out what the actual size. From what I have been told it is either a 30mm or a 32mm. I am wanting to replace the cracked and worn out bushings with a urethane kit for it. Thanks in advance!!!