Questions about a few issues?
Thread Starter
|
Captain
Joined: Sep 2010
Posts: 704
Likes: 0
FOr the 318 version one the Dayco and dorman both use the same sorta design:they are two seperate bodies put togeather with a flat spring..
http://www.rockauto.com/catalog/more...nid=447&jpid=2
OE and those based off the OE model are as follows: are a once peice which has the spring and mounting section inside it or from the back.. inserted so to speak.
http://www.rockauto.com/catalog/moreinfo.php?pk=347177&cc=1087714&jnid=447&jpid=6
http://www.rockauto.com/catalog/more...nid=447&jpid=2
OE and those based off the OE model are as follows: are a once peice which has the spring and mounting section inside it or from the back.. inserted so to speak.
http://www.rockauto.com/catalog/moreinfo.php?pk=347177&cc=1087714&jnid=447&jpid=6
I think I figured out the front end clunk and it's actually the UPPER right hand ball joint... The one I've definitely replaced already, and has a lifetime warranty. Piece of junk chinese part I guess, I don't even remember what brand it was. Definitely not the more expensive one, but I guess that's what I'll be getting next time around. No sense in having a lifetime warranty if I'll have to keep replacing it every few years.