electric fan help
Thread Starter
|
Registered User
Joined: Feb 2017
Posts: 20
Likes: 0
electric fan help
Hey guys so I ordered and electric fan with a wiring kit. The issue is finding somewhere to put the thermostat...after looking around I still can't seem to find a good location with matching threads on the motor. Any advice would be greatly appreciated as I'm anxious to get this going
Thread Starter
|
Registered User
Joined: Feb 2017
Posts: 20
Likes: 0
The threads are 1/2. I thought about tapping into the radiator and using heat resistant silicone to prevent any leaks. The kit I ordered is ebay I doubt it's popular enough to be a best seller lol
Site Moderator-Dodge Tech
Joined: Sep 2010
Posts: 3,724
Likes: 22
From: Nashville, Tennessee
Enjoy>>>
The basics should be the same.
Somehow Dakota Fanning was in the search results. lol
https://www.youtube.com/results?sear...ary+fan+Dakota+
Legend
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
You can try to find a sensor tap for the factory radiator hose size. Usually they are aluminum and you just hose clamp them inline.
Grand Champion
Joined: Feb 2015
Posts: 7,435
Likes: 578
