Is thia possible??
#1
#2
#3
Join Date: Feb 2015
Location: America's Pizza Oven.. Phoenix, AZ
Posts: 178
Likes: 0
Received 6 Likes
on
5 Posts
When I did my 5 speed swap I had to switch from an auto to a manual crank sensor. They have different plugs going into the harness. It's the same shape of plug and the wires are in the right spots, but there is a little fin on the plug that's in a different spot.
It's very possible that you got a bad one, I tried an ebay sensor first, but was getting intermittent stumbling and eventualy a crank sensor code.
I had to get a sensor from the $tealership and then shave the tab off so it would fit in my wiring harness.
My truck is a 2002 with a v6 so YMMV.
It's very possible that you got a bad one, I tried an ebay sensor first, but was getting intermittent stumbling and eventualy a crank sensor code.
I had to get a sensor from the $tealership and then shave the tab off so it would fit in my wiring harness.
My truck is a 2002 with a v6 so YMMV.
Last edited by tonypilot7; 09-26-2017 at 11:55 PM.