2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Passenger window/door lock not working

Thread Tools
 
Search this Thread
 
Old Apr 23, 2018 | 11:38 AM
  #1  
gonzo311's Avatar
gonzo311
Thread Starter
|
Registered User
Joined: Apr 2018
Posts: 2
Likes: 0
Default Passenger window/door lock not working

I just replaced the heater core in my 98' Dakota 5.9L. I had the dash, and ac box completely out. Everything works fine except the passenger side controls, the passenger window wont roll down from any of the controls (both sides). The door lock control does not work from either side, and when the passenger door is opened the dome light does not come on. I can roll down the drivers side window though.

I'm guessing I missed a connector somewhere, does anyone know which connector I could've missed? I looked around under the dash, behind the glove box, but couldn't see any connectors unplugged.
 
Reply
Old Apr 23, 2018 | 04:44 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,467
Likes: 4,220
From: Clayton MI
Default

I think there are two connectors in there...... second may be for power mirrors though... not sure. also, the door switch is mounted in the door jamb, so, access that from inside the truck.
 
Reply
Old Apr 27, 2018 | 02:12 PM
  #3  
gonzo311's Avatar
gonzo311
Thread Starter
|
Registered User
Joined: Apr 2018
Posts: 2
Likes: 0
Default

I found what I missed. The 2 connectors on the passenger side to the right of the glove box were not plugged in.
 
Reply




All times are GMT -4. The time now is 01:53 AM.