2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

03 dakota vent question

Thread Tools
 
Search this Thread
 
Old Jun 22, 2018 | 06:40 PM
  #1  
bomrat's Avatar
bomrat
Thread Starter
|
Rookie
Joined: Apr 2006
Posts: 60
Likes: 1
Default 03 dakota vent question

hi, my vent output low
hi, the output of the left and right vents are low. any ideas.
they barely blow any air
thanks
 
Reply
Old Jun 22, 2018 | 07:06 PM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,197
Likes: 363
From: Winston Salem, NC
Default

Tighten the warble spring and top off your blinker fluid.
 
Reply
Old Jun 23, 2018 | 11:14 AM
  #3  
bomrat's Avatar
bomrat
Thread Starter
|
Rookie
Joined: Apr 2006
Posts: 60
Likes: 1
Default

so, why do i get crap answers. its a lid-git question, i live in phoenix az now. there is nothing in the service manual i own describing the flow path of the vents. the inner vents blow well the outter vents are weak. the blend doors work well, its a new blower...
thanks
arlan
 
Reply
Old Jun 23, 2018 | 01:10 PM
  #4  
00DakDan's Avatar
00DakDan
Section Moderator
15 Year Member
Joined: Dec 2010
Posts: 4,858
Likes: 47
From: MA
Default

Most likely some of the seals in the plenum have failed due to age - not that the airflow was ever fairly strong out of the out vents.
 
Reply
Old Jun 23, 2018 | 06:27 PM
  #5  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,197
Likes: 363
From: Winston Salem, NC
Default

Originally Posted by bomrat
so, why do i get crap answers. its a lid-git question, i live in phoenix az now. there is nothing in the service manual i own describing the flow path of the vents. the inner vents blow well the outter vents are weak. the blend doors work well, its a new blower...
thanks
arlan
I was only joking because I knew there was someone on here that knows the answer.
 
Reply




All times are GMT -4. The time now is 02:04 AM.