2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

engine problems

Thread Tools
 
Search this Thread
 
Old Jul 23, 2019 | 05:45 AM
  #1  
wheily's Avatar
wheily
Thread Starter
|
Professional
5 Year Member
Joined: Jul 2018
Posts: 193
Likes: 9
From: oregon
Default engine problems

well my truck has had a cylinder #2 miss fire code that has gone away on its own...then it started chugging/miss fire on start up (sound like it flooded) but would clear up with in a few seconds...now it started surging under load at half throttle and pings every once and awhile (only drove 2 days like this )...well i checked live data on way home from work and my tps always reads 12 to 21 percent evan if wide open so i figure tps is bad but i also noticed the spark advance was jumping to 45 when cruzing is that normal and could there be some thing else wrong ? thanks
 
Reply
Old Jul 23, 2019 | 08:55 AM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,429
Likes: 4,215
From: Clayton MI
Default

What year is your truck? What engine?
 
Reply
Old Jul 23, 2019 | 11:01 AM
  #3  
ZEN357's Avatar
ZEN357
Veteran
Joined: Feb 2018
Posts: 408
Likes: 6
Default

Could be a spark plug, coil pack or the TPS.
 
Reply
Old Jul 23, 2019 | 03:49 PM
  #4  
wheily's Avatar
wheily
Thread Starter
|
Professional
5 Year Member
Joined: Jul 2018
Posts: 193
Likes: 9
From: oregon
Default

its a 99 4x4 3.9 engine...also it had a tune up about 3000 miles ago ..plugs, wires, cap and rotor....it also has an accel coil that previous owner installed
 

Last edited by wheily; Jul 23, 2019 at 05:16 PM.
Reply
Old Jul 23, 2019 | 08:36 PM
  #5  
magnethead's Avatar
magnethead
Legend
20 Year Member
Photogenic
Liked
Loved
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
Default

timing is based on TPS, IAT, and RPM. Yes 45 is normal. replace the TPS
 
Reply
Old Jul 24, 2019 | 06:04 AM
  #6  
wheily's Avatar
wheily
Thread Starter
|
Professional
5 Year Member
Joined: Jul 2018
Posts: 193
Likes: 9
From: oregon
Default

thanks for responses i installed new tps and shes running good other than the weird mis/chug when first started after its sat
 
Reply
Old Jul 24, 2019 | 08:40 PM
  #7  
magnethead's Avatar
magnethead
Legend
20 Year Member
Photogenic
Liked
Loved
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
Default

Originally Posted by wheily
thanks for responses i installed new tps and shes running good other than the weird mis/chug when first started after its sat
You might have an injector leaking/dripping or locking up, causing a momentary rich or lean condition at start
 
Reply
Old Jul 25, 2019 | 05:50 AM
  #8  
wheily's Avatar
wheily
Thread Starter
|
Professional
5 Year Member
Joined: Jul 2018
Posts: 193
Likes: 9
From: oregon
Default

ok thanks ..i acually have 1 new injector that i bought when the miss fire code popped up but then i thought to my self dont be a tightwad replace them all and im just waiting on them to come in
 
Reply




All times are GMT -4. The time now is 04:51 AM.