Torque question
Thread Starter
|
Rookie
Joined: Sep 2014
Posts: 58
Likes: 0
Torque question
I'm replacing the crankshaft position sensor on my 2001 Dakota SLT 4WD 4.7 V-8 and need to know what the torque spec is for the single bolt that holds this part in place. Also, do I need to use any kind of lock-tite on this bolt?
I have searched the site to the best of my ability and can't seem to find this information anywhere.
Thanks for your help.
Harkdodge
I have searched the site to the best of my ability and can't seem to find this information anywhere.
Thanks for your help.
Harkdodge
Champion
Joined: Jul 2011
Posts: 4,895
Likes: 35
From: Gilbert, Arizona
My guess around 22 to 25 ft. lb. no locking goo needed its a small bolt so 22 to 25 ft. lb. should do.
A link but remember on aluminum parts its less.
https://floorjacked.com/sae-bolt-tor...ade-5-grade-8/
on google https://www.google.com/search?q=torq...w=1164&bih=526
A link but remember on aluminum parts its less.
https://floorjacked.com/sae-bolt-tor...ade-5-grade-8/
on google https://www.google.com/search?q=torq...w=1164&bih=526
