2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

headliner removal

Thread Tools
 
Search this Thread
 
  #1  
Old 01-27-2021, 02:33 PM
Ltdave's Avatar
Ltdave
Ltdave is offline
Registered User
Thread Starter
Join Date: Dec 2020
Location: the eastern most point of Michigan
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default headliner removal

i need access to the inner roof panel to remove an orange service vehicle beacon and weld up the holes...

how do i remove the headliner without breaking it or causing the material to fall off? its in very good condition right now and id hate to wreck a good thing. i cant find any directions in either Chiltons or the other manual..
 
  #2  
Old 01-27-2021, 06:48 PM
Dodgevity's Avatar
Dodgevity
Dodgevity is offline
Champion
Join Date: Oct 2013
Location: Atlanta
Posts: 3,534
Received 376 Likes on 338 Posts
Default

How about telling us what you drive?
 
  #3  
Old 01-27-2021, 11:06 PM
Ltdave's Avatar
Ltdave
Ltdave is offline
Registered User
Thread Starter
Join Date: Dec 2020
Location: the eastern most point of Michigan
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Dodgevity
How about telling us what you drive?

yeah, sorry. over worked under paid...

2004 (2nd gen Dakota)
Stripped down SLT Club Cab

do you need what engine and transmission thats in it too?
 
  #4  
Old 01-28-2021, 08:40 AM
Dodgevity's Avatar
Dodgevity
Dodgevity is offline
Champion
Join Date: Oct 2013
Location: Atlanta
Posts: 3,534
Received 376 Likes on 338 Posts
Default

This is a quad cab, but it should be quite similar.

 
  #5  
Old 01-28-2021, 03:45 PM
ol' grouch's Avatar
ol' grouch
ol' grouch is offline
Champion
Join Date: May 2019
Location: S.W. Indiana
Posts: 4,223
Likes: 0
Received 576 Likes on 522 Posts
Default

Originally Posted by Ltdave
i need access to the inner roof panel to remove an orange service vehicle beacon and weld up the holes...

how do i remove the headliner without breaking it or causing the material to fall off? its in very good condition right now and id hate to wreck a good thing. i cant find any directions in either Chiltons or the other manual..

You might find some plugs to fill the holes. Unless you're restoring it, then weld them closed before you paint it. I bought an old Crown Vic police car once and plugged most of the holes but I put a CB antenna on the trunk lid. Nobody ever tail gated or cut me off in traffic after that. It's a mystery.
 
  #6  
Old 01-28-2021, 04:13 PM
2000_Dakota's Avatar
2000_Dakota
2000_Dakota is offline
Professional
Join Date: Oct 2020
Location: SE Arizona
Posts: 111
Received 2 Likes on 2 Posts
Default

Originally Posted by ol' grouch
You might find some plugs to fill the holes. Unless you're restoring it, then weld them closed before you paint it. I bought an old Crown Vic police car once and plugged most of the holes but I put a CB antenna on the trunk lid. Nobody ever tail gated or cut me off in traffic after that. It's a mystery.
A friend bought a retired California Highway Patrol Mustang LX once, he always had plenty of room. Even after he painted it... I'm sure it must have been the hubcaps
 



Quick Reply: headliner removal



All times are GMT -4. The time now is 05:38 AM.